Reekie Experience
9568 04/10/2019 Ground Shaft 60 Dia
Mat’l Spec: S355J2G3
9571 04/10/2019 Impeller (Final Machining)
9563 01/10/2019 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS003
9565 01/10/2019 Saturation dive bell bottom manway inner face rehabilitation
9561 28/09/2019 Deep Blue – HOC Survey Requirement
9550 25/09/2019 Machining 1 off SS flange
9551 25/09/2019 Ground Shaft 70 Dia
Mat’l Spec: S355J2G3
9552 25/09/2019 Rails 2000 x 75 x 55
9552 25/09/2019 Rails 6000 x 75 x 55
9553 25/09/2019 Ø65mm od x Ø35mm id x 6mm thk washer. Material Spec BS970 080M40
9553 25/09/2019 Buckstay Pin Ø35x250mm long pin. Material Spec BS970 080M40
9553 25/09/2019 Mossmorran – Boiler ‘B’ Scope: Buckstay Outer Pin Removal and supply of new pin and washer
9546 24/09/2019 Guidance Access Door Dowel Holes
9547 24/09/2019 RHS Grooved Wing Plate
9547 24/09/2019 LHS Grooved Wing Plate
9548 24/09/2019 Front Lidar Support (Drill Only)
9548 24/09/2019 Windscanner Support Frame (Drill only)
9548 24/09/2019 Front Lidar Support (Drill & Machine Pads)
9542 19/09/2019 Extension Arm No.4
9542 19/09/2019 Extension Arm No.3
9542 19/09/2019 Extension Arm No.2
9543 19/09/2019 GROOVING TOOL TO SUIT GS HYDRO RETAINING RING GROOVE (5.0mm RADIUS NOSE)
9543 19/09/2019 GROOVING TOOL TO SUIT GS HYDRO RETAINING RING GROOVE (4.0mm RADIUS NOSE )
9543 19/09/2019 GROOVING TOOL TO SUIT GS HYDRO RETAINING RING GROOVE (3.0mm RADIUS NOSE )
9543 19/09/2019 GROOVING TOOL TO SUIT GS HYDRO RETAINING RING GROOVE (2.5mm RADIUS NOSE )
9543 19/09/2019 DELIVERY OF FINISHED GOODS TO RENFREW
9540 18/09/2019 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS003
9536 16/09/2019 LUSM Resolution – Diesel Tank, Reactor Bulhead and additional Bulkhead Hole Trepanning
9534 13/09/2019 SHIM 100 MM LONG X 95 MM WIDE X 3 MM THICK
9534 13/09/2019 M18 LEFTHAND SHAFT
AUGER SCREW 2 START 19.05MM PITCH
243.3MM LONG SHAFT
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >