Reekie Experience
4994 17/11/2011 PPT/NB13/03/02 910x380x11mm
4994 17/11/2011 PPT/NB13/03/01 380x910x16mm
4994 17/11/2011 PPT/NB13/02/02 380x1410x15mm
4994 17/11/2011 PPT/NB13/02/01 380x1410x13 mm
4994 17/11/2011 PPT/NB13/01/02 380x910x20mm
4994 17/11/2011 PPT/NB13/01/01 380x910x20mm
4994 17/11/2011 PPT/NB12/03/02 380x910x14mm
4994 17/11/2011 PPT/NB12/03/01 380x910x19mm
4994 17/11/2011 PPT/NB12/02/02 380x1410x17mm
4994 17/11/2011 PPT/NB12/02/01 380x1410x11mm
4994 17/11/2011 PPT/NB12/01/02 380x910x18mm
4994 17/11/2011 PPT/NB12/01/01 380x910x11mm
4994 17/11/2011 M8WCV top flange four sets of two packer plates 01/01 and 03/01
4995 17/11/2011 Lassing Reactor 17 Nozzle manufacture complete supply by Reekie
4995 17/11/2011 Lassing Reactor 17 Nozzle manufacture complete supply by Reekie
4995 17/11/2011 Promat, reactor vessel, bottom nozzle, remove scrap nozzle, reform weld prep on inside of 42 thk vessel wall, reform weld prep on outside of doubler plate and jacket revisit site after welding by others and face underside,drill and tap holes
4986 14/11/2011 WEAR PLATE CARRIERS (MK 34)
4978 08/11/2011 ARRANGEMENT OF 90/100 SERIES CEPAC SS D/A CYLINDER BUSHED REAR EYE MOUNTED C/W ROD SWIVEL EYE
4978 08/11/2011 ARRANGEMENT OF 110 SERIES CEPAC SM D/A CYLINDER
4982 08/11/2011 Lassing Reactor 17 Nozzle manufacture complete supply by Reekie
4982 08/11/2011 Promat, reactor vessel, bottom nozzle, remove scrap nozzle, reform weld prep on inside of 42 thk vessel wall, reform weld prep on outside of doubler plate and jacket revisit site after welding by others and face underside,drill and tap holes
4983 08/11/2011 Sygenta PB015230 vessel flanges
4975 07/11/2011 ONE PIECE UPPER FRAME (MC) TO WELD TOP TAPER AND NEW RING THEN MACHINE AS PER DRG
4968 03/11/2011 PLATE LOCATION CUP
4968 03/11/2011 2 degree taper shims 55x55x5min with 33 hole
4970 03/11/2011 MS TUBE 73 OD X 5.5 WALL
4970 03/11/2011 PLATE LOCATION CUP
4970 03/11/2011 PLATE LOCATION CUP
4971 03/11/2011 55 SQUARE 2DEG TAPER WASHER – M30
4959 28/10/2011 REWORK TUBE BUNDLE
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >