Reekie Experience
4943 20/10/2011 PPB/SB13/03/01 404x876x14mm
4943 20/10/2011 PPB/SB13/02/02 810x1371x14mm
4943 20/10/2011 PPB/SB13/02/01 402x1371x18mm
4943 20/10/2011 PPB/SB13/01/02 810x902x14mm
4943 20/10/2011 PPB/SB13/01/01 370x902x20mm
4943 20/10/2011 PPB/SB12/03/02 700x905x11mm
4943 20/10/2011 PPB/SB12/03/01 398x905x11mm
4943 20/10/2011 PPB/SB12/02/02 790x1358x11mm
4943 20/10/2011 PPB/SB12/02/01 397x1358x14mm
4943 20/10/2011 PPB/SB12/01/02 790x874x12mm
4943 20/10/2011 PPB/SB12/01/01 397x872x15mm
4943 20/10/2011 PPB/NB13/03/02 804x872x18mm
4943 20/10/2011 PPB/NB13/03/01 397x872x15mm
4943 20/10/2011 PPB/NB13/02/02 804x1336x15mm
4943 20/10/2011 PPB/NB13/02/01 397x1336x18mm
4943 20/10/2011 PPB/NB13/01/02 804x927x15mm
4943 20/10/2011 PPB/NB13/01/01 397x927x20mm
4943 20/10/2011 PPB/NB12/03/02 788x910x17.5mm
4943 20/10/2011 PPB/NB12/03/01 384x911x8.4mm
4943 20/10/2011 PPB/NB12/02/02 797x1384x19.3mm
4943 20/10/2011 PPB/NB12/02/01 398x1384x15.4mm
4943 20/10/2011 PPB/NB12/01/02 716x903x18.5mm
4943 20/10/2011 PPB/NB12/01/01 384x904x18mm
4943 20/10/2011 Free Issue Profile Checking and Marking
4943 20/10/2011 Fit Baseplate and set up Dugard in preparation for doing the Bottom Flange packer plates
4937 19/10/2011 DETAIL OF SUCTION END BELL MACHINED TO ITEM 2 DIMENSION
4934 17/10/2011 Longannet Unit 3 6B HP Heater door way
4932 14/10/2011 GROOVING TOOL TO SUIT GS HYDRO RETAINING RING GROOVE (4.0mm RADIUS NOSE )
4932 14/10/2011 GROOVING TOOL TO SUIT GS HYDRO RETAINING RING GROOVE (3.0mm RADIUS NOSE )
4932 14/10/2011 GROOVING TOOL TO SUIT GS HYDRO RETAINING RING GROOVE (2.5mm RADIUS NOSE )
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >