Reekie Experience
4933 14/10/2011 SLEEVE
4933 14/10/2011 UPPER OUTER AIR SEAL RING
4933 14/10/2011 ADDITIONAL MACHINING COSTS DUE TO POROSITY
4933 14/10/2011 LOWER OUTER AIR SEAL RING ITEM 1
4930 13/10/2011 LOAD PIN
4930 13/10/2011 BLOCK IV REPLACEMENT END PLATE
4922 11/10/2011 four 7-14 tubes,
4923 11/10/2011 SPLINED SHAFT
4923 11/10/2011 SPLINED SHAFT & MATING SLEEVE
4924 11/10/2011 Dalry, Building 70, Column 03-230, Removal of 12 off M20 studs
4925 11/10/2011 ARRANGEMENT OF 110 SERIES CEPAC SM D/A CYLINDER
4925 11/10/2011 ARRANGEMENT OF 90 SERIES CEPAC D/A CYLINDER BUSHED REAR EYE MOUNTED
4921 10/10/2011 Longannet Unit 2, Valve 2F196 cover
4917 07/10/2011 Longannet Unit 2, Valve 2F196 cover
4917 07/10/2011 Longannet Power Station – U2 IP Strainer Stud Removal, 20 off 2.3/4″ BSF Studs on 39″ PCD, 8 off from RH, 7 off from LH
4912 06/10/2011 hire of equipment from 1st Jan 2012
4912 06/10/2011 FPSO Gimboa, Angola, Electric motorskid plate machining
4913 06/10/2011 SOUTHBOX13 OUTER : splice plate shaped template for checking sets of sixteen 60 dia studs during welding
4913 06/10/2011 SOUTHBOX13 INNER : splice plate shaped template for checking sets of sixteen 60 dia studs during welding
4913 06/10/2011 SOUTHBOX 12 OUTER : splice plate shaped template for checking sets of sixteen 60 dia studs during welding
4913 06/10/2011 SOUTHBOX 12 INNER : splice plate shaped template for checking sets of sixteen 60 dia studs during welding
4913 06/10/2011 NORTHBOX13 OUTER : splice plate shaped template for checking sets of sixteen 60 dia studs during welding
4913 06/10/2011 NORTHBOX 13 INNER : splice plate shaped template for checking sets of sixteen 60 dia studs during welding
4913 06/10/2011 NORTHBOX 12 OUTER : splice plate shaped template for checking sets of sixteen 60 dia studs during welding
4913 06/10/2011 NORTHBOX 12 INNER : splice plate shaped template for checking sets of sixteen 60 dia studs during welding
4913 06/10/2011 templates for checking sets of sixteen studs during welding
4914 06/10/2011 Transportation costs associated with delivery of final goods or equipment to Customer
4914 06/10/2011 HYJECTOR VENTURI
4914 06/10/2011 HYJECTOR BODY ‘Y’ PIECE
4916 06/10/2011 Drill rig …………..Jim 10 Foundation ring on vessel alongside at Port of Dundee
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >