Reekie Experience
4651 14/04/2011 Jim 10 Foundation ring on jack up drill rig “Rowan Viking” alongside in Queens Dock, Port of Dundee,
4649 12/04/2011 Counterboring two M16 tapped holes in seatings to 16 – 0 + 0.027 dia x 7 dp on site at Limehillock Quarry, AB55 6SS
4643 07/04/2011 N Caisson Camber Stop Beam Drilling
4645 07/04/2011 Ensco 100 oil rig alongside in Prince Charles Wharf, Port of Dundee, Dundee, BOP Handling package upgrade, port BOP set back area,
four 508 od x 15.88 wt x 1388 long tubulars
4642 06/04/2011 TOOLING COSTS
4642 06/04/2011 36″ ANSI 150 FLANGE TO DRILL 80 OFF 25.5 MM DIA HOLES AND TAP 8 OFF 7/8″ U.N.C. HOLES
4642 06/04/2011 32″ ANSI 150 FLANGE TO DRILL 84 OFF 22 MM DIA HOLES AND TAP 12 OFF 3/4″ U.N.C. HOLES
4642 06/04/2011 30″ ANSI 150 FLANGE TO DRILL 72 OFF 22 MM DIA HOLES AND TAP 16 OFF 3/4″ U.N.C. HOLES
4642 06/04/2011 40″ ANSI 150 FLANGE TO DRILL 80 OFF 22 MM DIA HOLES AND TAP 8 OFF 1″ U.N.C HOLES
4637 01/04/2011 FIXTURE COMPLETE WITH BUNGS
4637 01/04/2011 9 TH STAGE WHEEL DIA 43.460″/43.466″
4637 01/04/2011 8 TH STAGE WHEEL DIA 43.460″/43.466″
4637 01/04/2011 7 TH STAGE WHEEL DIA 43.460″/43.466″
4637 01/04/2011 6 TH STAGE WHEEL DIA 43.460″/43.466″
4637 01/04/2011 5 TH STAGE WHEEL DIA 43.460″/43.466″
4637 01/04/2011 4 TH STAGE WHEEL DIA 43.460″/43.466″
4637 01/04/2011 3 RD STAGE WHEEL 44.141″/44.147″ DIA X 7 DEG 24 MIN
4637 01/04/2011 2 ND STAGE WHEEL 45.608″/45.614″ DIA X 7 DEG 24 MIN
4637 01/04/2011 16 TH STAGE WHEEL DIA 43.420″/43.426″
4637 01/04/2011 15 TH STAGE WHEEL DIA 43.420″/43.426″
4637 01/04/2011 14 TH STAGE WHEEL DIA 43.420″/43.426″
4637 01/04/2011 13 TH STAGE WHEEL DIA 43.440″/43.446″
4637 01/04/2011 12 TH STAGE WHEEL DIA 43.440″/43.446″
4637 01/04/2011 11 TH STAGE WHEEL DIA 43.440″/43.446″
4637 01/04/2011 10 TH STAGE WHEEL DIA 43.460″/43.466″
4637 01/04/2011 1 ST STAGE WHEEL 47.231″/47.237″ DIA X 7 DEG 24 MIN
4637 01/04/2011 FWD STUB (0 STG) 48.974″/48.977″ DIA X 7 DEG 24 MIN
4639 01/04/2011 Borgsten Dolphin alongside at Invergordon BOP outlet back bore 3.160″ dia to required diameter for sleeving by 18.06-17.5″ length reaching thro 3.05″ id a x 17.1/2″ length machine mounted on 7.6/8″ od hub flange access to set tool from under BOP
4636 31/03/2011 DD66 CAST END PLATE
4636 31/03/2011 DD66 CAST HOUSING
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >