Reekie Experience
4560 17/02/2011 work completed during May 2012
4560 17/02/2011 work completed during April 2012
4560 17/02/2011 work completed during Mar 2012
4560 17/02/2011 work completed during Feb 2012
4560 17/02/2011 work completed to 31st Jan 2012
4560 17/02/2011 hire of 30 litre/minute 380/440V 32 amp 3 ph HPU
4560 17/02/2011 work completed 30th Jan to 2nd Feb 2013
4560 17/02/2011 work completed during Jan 2013, cold cutting (and weld prepping some) penetrations on BSVs for SPP1 at Sellafield
4560 17/02/2011 work completed during August 2012 for Doosan Babcock at SPP1 at Sellafield
4560 17/02/2011 Sellafield project SSP1, BSV3, 25thk stst flat top plate, nozzles N56 and N80
4560 17/02/2011 Sellafield new Buffer Storage Vessel on the SPP1 laydown area
Machining joining plate on temp support beams
4560 17/02/2011 Sellafield new Buffer Storage Vessel on the SPP1 laydown area
4544 10/02/2011 GENERAL PICKUP AND DELIVERY OF GOODS
4544 10/02/2011 SERVO CYLINDER TOP BUSH
4544 10/02/2011 MANUFACTURE OF NEW PISTON
4544 10/02/2011 BORING & HONING OF SERVO CASING
4544 10/02/2011 SERVO BOTTOM COVER WITH BUSH
4544 10/02/2011 SERVO SHAFT
4545 10/02/2011 ATOMISER TAILPIECE 2B ‘Y’ JET ATOMISER
4546 10/02/2011 EN8 MANIFOLD END PLATES 470 MM O/DIA X 174 MM O/ALL
4546 10/02/2011 MS FLANGE 450 MM O/DIA X 127 MM I/DIA X 25 MM THK
4539 09/02/2011 Hire of HT40 drilling machine complete with MTS adaptor and pipe clamp for Ferrybridge C
4542 09/02/2011 Calmac Ferry Jupitor, Aft Gearbox coupling hole drilling and reaming. 16 off holes Ø22 (to be opened out to max Ø24) and reamed to provid interference fit for fitted bolts. Supply 16 off fitted bolts.
4542 09/02/2011 NEW FITTED BOLTS FOR GEARBOX REAMED HOLES
4536 08/02/2011 DRIVE SIDE RAIL SYSTEM
4536 08/02/2011 TENDING SIDE RAIL SYSTEM
4536 08/02/2011 DOCTOR ASSEMBLY SAFE ALL TRAY
4528 02/02/2011 Transportation costs associated with delivery of final goods or equipment to Customer
4528 02/02/2011 HYJECTOR VENTURI
4525 01/02/2011 MS RUB RING 32.830 ” O/DIA X 28.540″ I/DIA X 2.224 ” O/ALL
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >