Reekie Experience
4517 25/01/2011 Transportation costs associated with delivery of final goods or equipment to Customer
4517 25/01/2011 HYJECTOR COVER
4517 25/01/2011 HYJECTOR BODY ‘Y’ PIECE
4511 21/01/2011 PLATE 16 MM THICK X 2200 MM LONG ROLLED TO 1860 MM O/DIA COMPLETE WITH WELD PREPS 37.1/2° ON EACH ENDS FACING OUTWARD AND TACK WELDED ONLY PLATE TO BE ULTRASONIC TESTED AFTER BENDING TO LC4 MATERIAL BSEN10025 S275 0.25% CARBON MAXIMIUM
4511 21/01/2011 72″ SLIP ON FLANGE 83″ O/DIA X 73.1/2″ I/DIA X 2.7/8″ THICK COMPLETE WITH 44 OFF 1.5/8″ DIA HOLES ON A 79.1/2″ P.C.D.
4511 21/01/2011 72″ SLIP ON FLANGE 83″ O/DIA X 73.1/2″ I/DIA X 2.7/8″ THICK
4514 21/01/2011 SOUTHBOX 13 HJ OUTER STUD POSITIONING JIG – FINAL HOLE MACHINING
4514 21/01/2011 SOUTHBOX 13 HJ INNER STUD POSITIONING JIG – FINAL HOLE MACHINING
4514 21/01/2011 SOUTHBOX 12 HJ OUTER STUD POSITIONING JIG – FINAL HOLE MACHINING
4514 21/01/2011 SOUTHBOX 12 HJ INNER STUD POSITIONING JIG – FINAL HOLE MACHINING
4514 21/01/2011 NORTHBOX 13 HJ OUTER STUD POSITIONING JIG – FABRICATION
4514 21/01/2011 NORTHBOX 13 HJ INNER STUD POSITIONING JIG – FINAL HOLE MACHINING
4514 21/01/2011 NORTHBOX 12 HJ OUTER STUD POSITIONING JIG – FINAL HOLE MACHINING
4514 21/01/2011 NORTHBOX HJ INNER JIG, PIN AND STUD ASSEMBLY
4514 21/01/2011 128 60 dia x 76 long Steel Studs
4514 21/01/2011 Jigs to assist with positioning of eight sets of 16 in number 60 dia x 100 long steel studs onto box girder web plates on underside of bridge
4508 20/01/2011 MS FABRICATED BASEFRAME 4350 MM LONG X 1270 MM WIDE
4508 20/01/2011 M S FABRICATED BASEFRAME 4500 MM LONG X 1000 MM WIDE
4508 20/01/2011 MS FABRICATED BASEFRAME 4736 MM LONG X 1250 MM WIDE
4509 20/01/2011 Technip “Deep Constructor” at A&P Tyne Hebburn Yard, No 1 Thruster, vertical bearing housing, anti rotation hole
4503 17/01/2011 MV Caledonian Isles; 4 off Stern Ramp Hinges, 2 off Bow Ramp Outer Section Hinges
4502 16/01/2011 Longannet Unit 4 feed heater v/v F107 remove one of twelve 2″ BSF studs on 17 pcd
4496 12/01/2011 MS FIXTURE 1070 MM O/DIA X 800 MM I/DIA X 70.00 MM O/ALL
4496 12/01/2011 MS FIXTURE 951 MM O/DIA X 760 MM I/DIA X 50.00 MM O/ALL
4496 12/01/2011 MS FIXTURE 1072 MM IO/DIA X 800 MM I/DIA X 50.00 MM O/ALL
4493 06/01/2011 Ø26″x1/8″dp Counterbore Machining, centreline horizontal
4490 05/01/2011 MACHINING OF UPPER AIR SEAL RING
4488 23/12/2010 Fasnakyle top spider, alternator tapered dowel holes, hire of insitu drilling equipment excluding tooling
4487 22/12/2010 Longannet PS, Unit1B FD Fan Shaft N.D.E.
24 hours working required
4483 20/12/2010 STAR WHEEL 405 MM DIA COMPLETE WITH 8 SLOTS 52 MM WIDE
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >