Reekie Experience
4483 20/12/2010 STAR WHEEL
4483 20/12/2010 PLATE MACHINED TO 485 MM LONG X 197 MM WIDE COMPLETE WITH HALF CIRCLE CUT TO 207.5 MM RAD
4483 20/12/2010 EXTENSION SHAFT 205 MM LONG
4483 20/12/2010 EXTENSION SHAFT FOR PADDLE
4475 10/12/2010 Transportation costs associated with delivery of final goods or equipment to Customer
4475 10/12/2010 HYJECTOR COVER
4475 10/12/2010 HYJECTOR BODY ‘Y’ PIECE
4473 09/12/2010 24″ O/DIA X 11/16″ WALL TUBE CUT TO 325 MM LONG
4473 09/12/2010 24″ O/DIA X 9/16″ WALL TUBE 3 OFF CUT @ 445 MM, 12 @ 325 MM AND 3 @ 140 MM LONG
4473 09/12/2010 20″ O/DIA X 19/32″ WALL TUBE 6 OFF CUT @ 1695 MM FROM 12 METRE RANDOM
4473 09/12/2010 20″ O/DIA X 1/2″ WALL TUBE CUT TO 320 MM LONG
4473 09/12/2010 16″ O/DIA X 21/32″ WALL TUBE SAWN 3 OFF @ 550 MM AND 3 OFF @ 315 MM LONG
4473 09/12/2010 14″ O/DIA X 19/32″ WALL TUBE SAWN TO 310 MM LONG
4473 09/12/2010 12.3/4″ O/DIA X 9/16″ WALL TUBE SAWN TO 310 MM LONG
4473 09/12/2010 10.3/4″ O/DIA X 1/2″ WALL TUBE SAWN 310 MM LONG
4474 09/12/2010 Cradle main Pivot Clevis Repair
4474 09/12/2010 High tip bucket repairs in Reekie’s works
1. grind out and weld fill all cracks
2. remove existing eight hardox bosses, replace, line bore two lines of four bosses
3. remove and replace existing stop two pairs of stop plates
4. any other work found
4471 08/12/2010 Canbar 12 Roller Drum Machining
4468 03/12/2010 Transportation costs associated with delivery of final goods or equipment to Customer
4468 03/12/2010 HYJECTOR VENTURI
4469 03/12/2010 MV Stena Leader spare rudder in Warbreck’s workshops, Liverpool
4462 01/12/2010 Machine 1 off Foundation Ring
4463 01/12/2010 Twin Otter aircraft, Main Landing Gear and Wing attachment fittings
4459 29/11/2010 UPPER SEAL RING.
4458 26/11/2010 ONE PIECE UPPER FRAME (MC) TO WELD TOP TAPER AND NEW RING THEN MACHINE AS PER DRG
4455 25/11/2010 Longannet Power Station, Unit 2 Boiler, Drain valve SD4, valve seat
4456 25/11/2010 EN 24T BUSHES 120 MM O/DIA X 110 MM I/DIA X 50 MM O/ALL (Cancelled – Material charge only)
4456 25/11/2010 Backfill Plough port and starboard leg and mould board assemblies
4451 24/11/2010 Bush Removal Tooling
4451 24/11/2010 SO4451 MH32 SPARES (2 Sets)
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >