Reekie Experience
4383 01/10/2010 WEAR PLATE BOLT c/w NUTS
4384 01/10/2010 TOOL STEEL DRIVE PIN 1/2″ O/DIA X 4.69 ” LONG
4384 01/10/2010 TOOL STEEL DRIVE PIN 3/8″ O/DIA X 3.44 ” LONG
4384 01/10/2010 ST ST DRIVE ADAPTOR 2.75″ O/DIA X 3.91″ O/ALL
4384 01/10/2010 TOOL STEEL DRIVE PIN 0.312″/0.314″ DIA X2.44″ LONG
4384 01/10/2010 STEEL COUPLING FLANGE 3.560″ O/DIA X 2.130″ I/DIA X 0.630″ O/ALL
4384 01/10/2010 STEEL DRIVE PLATE 3.000″ O/DIA X 1.630″ O/ALL
4384 01/10/2010 STEEL INDICATOR 2.500″ O/DIA X3.500″ O/ALL
4384 01/10/2010 STEEL SPACER 2.520″ O/DIA X 1.500″ I/DIA X 0.090″ THK
4384 01/10/2010 STEEL SPACER 2.520″ O/DIA X 1.500″ I/DIA X 0.090″ THK
4384 01/10/2010 ST ST SPACER 0.950″ O/DIA X 0.505″ I/DIA X 0.190″ O/ALL
4380 30/09/2010 Plant 5, Line 52, Transport Section, 50thk plate
4375 23/09/2010 Transportation costs associated with delivery of final goods or equipment to Customer
4375 23/09/2010 ST ST SUPPORT BEAM 1660 MM LONG X 200 MM WIDE X 115 MM O/ALL
4375 23/09/2010 ST ST FRAME TS RAIL SYSTEM 1038 MM LONG X 675 MM
4375 23/09/2010 ST ST DS RAIL SYSTEM 1038 MM LONG X675 MM
4365 16/09/2010 TO MACHINE TAPER FOR CONEHEAD 1300 M/C WELD UP TAPER RESET AND MACHINE TAPER 39.2 ° TO 4 MM DIMENSION
4366 16/09/2010 Lower Manway Trunking to be machining at Renfrew, to be finished by Saturday, Ø1450od 1250id face, Ø1450×85.5 od, Ø1250×50 bore
4367 16/09/2010 three wind turbine tower 3570 id x 3960 od x 95+/- 2 thk flanges each with 100 holes 51 +/- 0.5 dia on ….. pcd, towers c/l horizontal on rollers to permit indexing holes to required working height
4361 15/09/2010 OUTER CLEVIS LUG FOR TUBES
4361 15/09/2010 INNER CLEVIS LUG FOR TUBES
4357 14/09/2010 Plant 5, Line 52, Transport Section
4358 14/09/2010 DIMENSIONAL CHECK OF FRONT RACK BEAM GUIDE BASE
4358 14/09/2010 BASE PLATE
4358 14/09/2010 FRONT RACK BEAM GUIDE BASE
4355 13/09/2010 ISM of 4 off Support Bearing Housings, 316 Stainless Steel
4351 09/09/2010 OVERRIDE STOP
4351 09/09/2010 LOCKING RING
4351 09/09/2010 OVERRIDE BEARING SPACER
4351 09/09/2010 TRANSDUCER HOUSING
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >