Reekie Experience
4322 23/08/2010 HYJECTOR COVER
4322 23/08/2010 HYJECTOR BODY ‘Y’ PIECE
4320 20/08/2010 Transportation costs associated with delivery of final goods or equipment to Customer
4320 20/08/2010 INLET NOZZLE FOR FERRYBRIDGE
4312 17/08/2010 Sea Tube SWL0767 180OD x 75ID
4307 13/08/2010 3B ‘Y’ JET ATOMISER ASSEMBLY
4308 13/08/2010 Dryer shaft ISM 180 dia x 95 length to 160 diameter
4305 12/08/2010 ST ST OUTER TRACK ‘ B’ 70 MM X 58 MM X 700 MM LONG
4305 12/08/2010 ST ST CENTRE TRACK ‘A’ 70 MM X 58 MM X 700 MM LONG
4305 12/08/2010 ST ST STRAP 32 MM X 8 MM X 700 MM LONG
4305 12/08/2010 ST ST CHAIN LINKS (OUTER ) 34 MM WIDE X 42 MM LONG X 20 MM THK
4305 12/08/2010 ST ST CHAIN LINK PINS 20 MM O/DIA X 90 MM LONG
4305 12/08/2010 ST ST INNER CHAIN LINK 34 MM WIDE X 124 MM LONG X25 MM THK
4305 12/08/2010 MS JIG FOR ST ST TRACK ASSEMBLY
4303 10/08/2010 SUPPLEMENT FOR WMG-BOLLARD-061018-CO
4300 09/08/2010 STST TUBE 560 ID X 1420mm Lg to be bored min to clean for final honing
4298 06/08/2010 MS PIPE BENDS 97 MM O/DIA X 12 MM WALL
4299 06/08/2010 Longannet Unit 1 IP Pedestal Oil Discharge Pipework ISM three pipe flanges
4293 03/08/2010 Emegent Work, 3.5″ 8 UN Stud Drilling
4288 23/07/2010 5″ X 513 MM C.M.S. TANK ASSEMBLY
4288 23/07/2010 4″ X 793 MM C.M.S TANK ASSEMBLY
4288 23/07/2010 4.5″ X 618 MM C.M.S TANK ASSEMBLY
4288 23/07/2010 4″ X 423 MM C.M.S TANK ASSEMBLY
4288 23/07/2010 3.5″ X 553 MM C.M.S. TANK ASSEMBLY
4287 22/07/2010 Auchenshoogle/Fullarton Road M74 Bridge spreader plate
Insitu machining (drilling and tapping) of four new M30 x 50 dp blind
uphand within 190mm gap
4271 13/07/2010 HYDROCONE 36″ REMACHINING OF TOP SHELL 3 ARM 1.442.1000
4271 13/07/2010 HYDROCONE 36″ CRUSHER TO MACHINE TAPER ,WELD THEN REMACHINE TAPER TO DRAWING 442.5868
4271 13/07/2010 HYDROCONE 36″ CRUSHER TO MACHINE TAPER ,WELD THEN REMACHINE TAPER TO DRAWING 442.5868
4268 12/07/2010 TO MANUFACTURE SPRING PLUNGER FROM SAMPLE
4270 12/07/2010 Subsea 7 K5A Caisson upper flange ISM 1200 id x 1345 od area of 1432 od x 25 thk flange with risers passing through
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >