Reekie Experience
4270 12/07/2010 extra work
4267 09/07/2010 ISM Front Rack Main Trolley Grap Twist, Swivel Bearing Seat, Ø1560 id Ø1700 od bearing seat on spacing rope anchor location assy
4260 08/07/2010 Line boring of 90 Dia holes in Grab Boom
4256 07/07/2010 CRADLE FRAME REBUSH 2 OFF WORN HOUSINGS (LINE BORE) SHRINK IN FIT BY CLIENT
4256 07/07/2010 REBUSH 2 OFF WORN HOUSINGS (LINE BORE) SHRINK IN FIT
4257 07/07/2010 Push Back Column Lifting Bolt Hole, Open out from 2″ to 3″ UNC 4 tpi
4257 07/07/2010 Push Back Column Lifting Bolt Hole, Open out from 2″ to 3″ UNC 4 tpi
4252 02/07/2010 WELDING OF TAPER AND REPLACEMENT RING,CHECK RECESS OPPOSITE FACE THEN FINAL MACHINING AS PER DRAWING
4253 02/07/2010 RioTintoAlcan Lynemouth Power Station valves ISM to remove studs and machine vv seat
4247 30/06/2010 MS DISCS 890 MM O/DIA X 10 MM THK ( DRILL PATTERN SAME AS PER DRG 14129-C)
4247 30/06/2010 MS BAFFLE PLATE DISC 900 MM DIA X 13 MM THK (DRILL PATTERN SAME AS PER DRG 14129-C )
4247 30/06/2010 MS DISC 880 MM O/DIA X 6 MM THK ( DRILL PATTERN SAME AS PER DRG 14129-C)
4243 28/06/2010 DRIVE SPROCKET
4238 24/06/2010 MS TUBEPLATE 1086 MM O/DIA X 73 MM O/ALL
4224 17/06/2010 ISM Keyways on Moving Platen
4227 17/06/2010 MS PLATE2792 MM LONG X 1070 MM WIDE X 20 MM THK
4227 17/06/2010 MS PLATE 2792 MM LONG X 1070 MM WIDE X 20 MM THK
4220 15/06/2010 BP Magnus offshore, Boring pair of clevis bores Ø76mm
4217 14/06/2010 Equipment Preparation of HPU and accessories and Transport to Ferrybridge
4214 11/06/2010 BLIND NIPPLES 55 MM O/DIA X 180 MM O/ALL
4215 11/06/2010 MS FLUSH HATCH COVERS 3510 MM LONG X 1010 MM WIDE X 15 MM THICK
4216 11/06/2010 1300 CONEHEAD TAPER WELD REPAIR
4211 10/06/2010 RioTintoAlcan Lynemouth Power Station ISM cold cutting and weld prepping Unit 2 hot reheat CMV pipework 10.3/4 to 22.4 inch od
4209 08/06/2010 Solons Tidal Turbine ISM boring of 1500 1490 and 1340 bores and 1340 id x 1490 od recessed face in 1900 id x 2295 long “tube”
4208 07/06/2010 M64 GRADE 8 SELF COLOUR NUT
4208 07/06/2010 M64 STUD X 1000mm Long
4208 07/06/2010 M64 X 2P STUD X 1000mm Lg
4208 07/06/2010 NUT M64 X 2P
4208 07/06/2010 MS FLINGER RING 355 MM O/DIA X 190 MM I/DIA X 128 MM O/ALL
4208 07/06/2010 KEY 45 X 25 X 290
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >