Reekie Experience
4208 07/06/2010 EYE BOLT SHAFT
4208 07/06/2010 LABYRINTH RING
4207 04/06/2010 British Salt ISM 21st & 22nd June
4207 04/06/2010 British Salt Middlewich CW10 0JP, propeller pump, ISM 175 id x 215 od x 10 dp into underside counterbored face of propeller hub and supply 175 id x215 od x 10 thk 316 stst washer
4207 04/06/2010 Survey British Salt Pump – Middlewich
4200 03/06/2010 TO MACHINE ONE FACE OF FLANGE TO 45 MM MINIMUM COMPLETE WITH 83 OFF 36 MM DIA HOLES THROUGH 45 MM THK
4200 03/06/2010 TO MACHINE ONE FACE X 130 MM WIDE OF THE DOOR COMPLETE WITH 83 OFF 36 MM DIA HOLES
4202 03/06/2010 ISM 2 off Tower Flange using R5000
1 off 3677od 3295id
1 off 3374od 3016id
4199 02/06/2010 Alcan Unit 2 reheat steam chests, ISM to remove 27 seized of 48 1.1/4″ BSF studs and retap all 48 holes
4199 02/06/2010 Alcan unit 2 IP Cylinder ISM to remove two sets of twenty 1.1/2″ BSF studs
4199 02/06/2010 Lynemouth Unit 2 stud busting as for unit 3
4195 01/06/2010 FABRICATED TINES (IE BUCKETS/SHOVELS)
4195 01/06/2010 MS FORK END 17″ WIDE X 26 ” LONG X 5″ O/ALL
4195 01/06/2010 EYE BOLT SHAFT
4197 01/06/2010 SUCTION END BELL
4197 01/06/2010 DETAIL OF SUCTION END BELL MACHINED TO ITEM 2 DIMENSION
4198 01/06/2010 ISM SHM Wash Water Cyclone Boring Nozzle 38.2 to 49.3mm
4194 28/05/2010 Offshore India ISM VX groove on BOP nominally 18″ id x through bore 21.022″ od taper
4190 26/05/2010 Divers habitat for pipe welding ISM six 1″ NPT penetrators and one 3/4″ penetrator to remove them supply new in 316L stst and weld in place
4192 26/05/2010 BASE SUPPORT DRIVE SIDE WRS WADING ROLL SYSTEM
4192 26/05/2010 BASE SUPPORT TENDING SIDE WRS WADING ROLL SYSTEM
4183 20/05/2010 DETAIL OF TRANSITION HEAD FOR REHEATER ATTEMPERATOR
4183 20/05/2010 ITEM 2 DIAPHRAGM
4183 20/05/2010 ITEM 1 SPRAY NOZZLE
4184 20/05/2010 90 MM O/DIA X 350 MM LONG TEST BAR
MATERIAL ALLOY 600
4184 20/05/2010 TEST BAR 90 MM O/DIA X 350 MM LONG
MATERIAL 16Mo3
4184 20/05/2010 DETAIL OF TRANSITION HEAD FOR SUPERHEATER ATTEMPERATOR
4184 20/05/2010 ITEM 2 DIAPHRAGM
4184 20/05/2010 ITEM 1 SPRAY NOZZLE
4186 20/05/2010 MS HATCH RINGS 3510 MM LONG X 580 MM WIDE X 30 MM THK
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >