Reekie Experience
4182 19/05/2010 SMALL GEAR WHEEL 130 MM O/DIA X 55 MM I/DIA X 57 MM O/ALL
4182 19/05/2010 LARGE GEAR WHEEL 200 MM O/DIA X 55 MM I/DIA X 57 MM O/ALL
4065 18/05/2010 ism Montrose North Pedestral Crane Test Piece 6″x2″ MH32
4177 17/05/2010 Leeds Burullus Spoolbody Plug Repair drill tap counterbore 1.1/8″ 8 UN plug and body to 3/4″ UNC plug with 1.5″ dia x 1/2″ dp counterbore
4170 13/05/2010 PAD 190 MM O/DIA X 82.5 MM I/DIA X 35MM THICK
4170 13/05/2010 DSM Dalry insitu machining of 3″ nb #150 ANSI stainless steel pad flange on underside of vessel (maybe steel with stst cladding)
4163 07/05/2010 emergent work, machine clearance inside of top inlet, drill out one 3.1/4″ BSF seized casing stud
4163 07/05/2010 RIo Tinto Alcan Lynemouth Power Station ISM
4160 04/05/2010 ISM Cockenzie Stud Busting 2 off I.P. Strainer Flanges 2 x 16 off 2.3/4″ BSF?, 2 crews required
4127 01/05/2010 Shoreham PS Emergent Work
4153 28/04/2010 Ferguson Coal’s Cat 966G wheeled loading shovel at Clydeport Hunterson ISM steering hinge
4155 28/04/2010 Equipment Preparation for Hire of HT40 Drilling Machine with Air Motor
4150 27/04/2010 ONE PIECE UPPER FRAME (MC) TO MACHINE TAPER,WELD AND REMACHINE TAPER
4151 27/04/2010 MS TOP FLANGE 1245 MM O/DIA X 1124 MM I/DIA X 40 MM THK
4151 27/04/2010 MS COVER PLATE 1245 MM O/DIA X 83 MM O/ALL
4152 27/04/2010 MACHINE AND WELD 2 OFF FREE ISSUE FITTINGS
4152 27/04/2010 hire of welder 11th Aug
4152 27/04/2010 hire of welder
4152 27/04/2010 Povision of welder on Type 45
4148 26/04/2010 1300 UPPER FRAME TO MACHINE TAPER THEN WELD TAPER ONLY DRAWING 603 1504
4145 23/04/2010 Barry W707 950 Tank pad machining 2″ id x 6″ od pad with four 5/8″ UNC studs on 4.1/2″ pcd only 10mm gap between od of pad and wall working uphandISM face and if required drill out studs retap holes drill & tap new holes
4136 19/04/2010 FABRICATED BASE FRAME 6800 MM LONG X 1250 MM WIDE
4130 13/04/2010 ITEM D THERMOCOUPLE 2.1/2″ O/DIA X 1.3/8″ I/DIA X 4.3/8″
4130 13/04/2010 ITEM C THERMOCOUPLE STUB 2.1/2″ O/DIA X 1.3/8″ I/DIA X 1.7/8″ LONG
4130 13/04/2010 ST ST THERMOCOUPLE POCKETS 63.5 MM O/DIA X 285.7 MM LONG
4128 12/04/2010 DSV Alliance Echo Chamber top entry ISM full 618 id x 810 od top face to clean up flat to a smooth finish
4129 12/04/2010 C.S. BRUSH PLOUGHS c/w FLATS and SCREWS
4125 09/04/2010 ISM Combine Axel Bore Ø175x60mm
4117 08/04/2010 FABRICATED BASE FRAME6400 MM LONG XS 1250 MM WIDE
4120 08/04/2010 RING SUPPORT
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >