Reekie Experience
3932 17/11/2009 SLINGROD 3/4″ DIA X 75″ LONG THREADED 18″ LONG ONE END & 6″ LONG THE OTHER COMPLETE WITH 4 OFF FULL NUTS
3932 17/11/2009 SLINGROD 16 MM DIA X 2870 MM LONG THREADED 450 MM LONG ONE END & 50 MM LONG THE OTHER COMPLETE WITH 3 OFF M16 FULL NUTS & 1 OFF WELDLESS EYE NUT
3932 17/11/2009 SLINGROD 16 MM DIA X 2200 MM LONG THREADED 450 MM LONG ONE END & 50 MM LONG THE OTHER COMPLETE WITH 3 OFF M16 FULL NUTS & 1 OFF WELDLESS EYE NUT
3932 17/11/2009 SLINGROD 5/8″ DIA X 30″ LONG THREADED 10″ LONG ONE END & 2″ LONG THE OTHER COMPLETE WITH 3 OFF FULL NUTS & 1 OFF WELDLESS EYE NUT
3932 17/11/2009 1.1/8″ B.S.W. FULL NUT
MAT SPEC : MILD STEEL
3932 17/11/2009 1.1/4″BSW NUT
3932 17/11/2009 3/4″BSW FULL NUT
3925 13/11/2009 Hire of C3 Machine air powered with two axis slideway, grooving and turning tools to form 1″ deep x 3″ wide groove in 20.25″ od sleeve
3922 11/11/2009 SUPPLEMENT FOR WMG-BOLLARD-061018-CO
3916 09/11/2009 3B FABRICATED ATOMISER BODY
3913 05/11/2009 ism lifting lugs Ø108 – Ø118
3910 03/11/2009 ISM Dow Corning upper cone flange 995 mm id x 1324 mm od
3905 02/11/2009 BLACK ROUND PROFILE SOLID 680 MM O/DIA X 100 MM THICK
MAT SPEC : BSEN10028-2 GRADE P265GH
ULTRASONIC TEST TO BS 5996-LC4
3905 02/11/2009 BLANKING END PLATE 665 MM O/DIA X 85 MM THK
3908 02/11/2009 LABYRINTH RING 310 MM O/DIA X 210 MM I/DIA X 63 MM O/ALL
3908 02/11/2009 MS LABYRINTH 310 MM O/DIA X 210 MM I/DIA X 63 MM
3908 02/11/2009 MS RING 408 MM O/DIA X 355 MM I/DIA
3908 02/11/2009 HOUSING BRACKET
3897 27/10/2009 ISM Isle of Bute Line boring Ferry Ramp Hinges
3889 23/10/2009 W348 reactor cone lower flange with cone
3889 23/10/2009 W348 reactor cone upper flange
3886 22/10/2009 additional costs after 26th Jan
3886 22/10/2009 additional costs
3886 22/10/2009 Hire of Drilling Machine and Tooling to Drill 3″NPTSubsea
3887 22/10/2009 MACHINING OF UPPER AIR SEAL RING
3880 20/10/2009 MV Alliance thruster drive shaft lower bearing housing ISM from 236 to 255 dia x 115 length 700 reach
3881 20/10/2009 OSM 3538id spigot to bring back to round. R5000.
3878 19/10/2009 C.S. BRUSH PLOUGHS c/w FLATS and SCREWS
3878 19/10/2009 7″ DIA HANDWHEELS WITH 3/4″BSW THREAD
3875 15/10/2009 Lynemouth PS extra work
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >