Reekie Experience
3721 07/07/2009 ISM 30000 tonne press, m/c 2 off 151 wide x 12 dp with R3 in corners x 136″ long strips running into 151 wide x 3 dp with R3 x 3660 long, 12 dp c/w 32 off M16 x 30 dp drilled and tapped holes
3713 02/07/2009 BOGGIE WHEEL 13.1/2″ O/DIA X 3.1/8″ WIDE COMPLETE WITH P.B.1 BUSH & SPARE
3717 02/07/2009 Transportation costs associated with delivery of final goods or equipment to Customer
3717 02/07/2009 HYJECTOR VENTURI
3717 02/07/2009 HYJECTOR BODY ‘Y’ PIECE
3711 01/07/2009 ENGINE END BELL 3′-1 “X 9-1/8” O/ALL
MATSPEC BS 1452 G17 CAST IRON
3712 01/07/2009 MS SHAFT 550 MM O/DIA X 1326 MM O/ALL
MAT SPEC : CARB STEEL
3712 01/07/2009 ST ST SEAL HOLDER 135 MM O/DIA X 275 MM O/ALL
MAT SPEC : ST ST TYPE316
3712 01/07/2009 CASING LID APPROX 700 MM X 700 MM X 500 MM HIGH
MAT SPEC :CARB STEEL
3712 01/07/2009 MS CASING BOTTOM 738 MM X738 MM X 416 MM HIGH
MAT SPEC :CARB STEEL
3712 01/07/2009 FARICATED CASING ASSY
MAT SPEC :CARB STEEL
3712 01/07/2009 FABRICATED BASE FRAME APPROX 1350 MM WIDE X 1600 MM LG
MAT SPEC :CARB STEEL
3705 29/06/2009 BRUSH PLOUGH CARRIERS c/w MK1,2,3,12
3702 25/06/2009 WEAR PLATE BOLT c/w NUTS
3689 22/06/2009 ST ST TENDING SIDE RAIL 2438 MM LONG X 150 MM WIDE X 225 MM O/ALL ( OPP HAND)
3689 22/06/2009 ST ST TENDING SIDE RAIL 2438 MM LONG X 150 MM WIDE X 225 MM O/ALL (AS DRAWN)
3689 22/06/2009 ST ST SAFE ALL TRAY 2405 MM LONG X 200 MM X 130 MM WIDE
3684 17/06/2009 HIRE OF 1149 BORING EQUIPMENT
3683 16/06/2009 Buzzard enhancement project seating for V-1500 crude oil stripper ISM 32xM72 x 60 dp on 5260 pcd
3678 15/06/2009 FABRICATED BASE FRAME4300 MM LONG X 1000 MM WIDE
3681 15/06/2009 97odx12wt hydraulic tube St52.4 tube, on site or in Reekie shop machining of GS Hydro retaining ring grooves
3675 12/06/2009 6506 SERIES DIAPHRAGM PLATE 580 MM O/DIA X 50 MM O/ALL
MAT SPEC : 304 ST ST
3676 12/06/2009 Transportation costs associated with picking up material from Customer site for delivery to Reekie.
3676 12/06/2009 Transportation costs associated with delivery of final goods or equipment to Customer
3676 12/06/2009 REMOVAL OF EXITING BUSH THEN FIT REPLACEMENT
3676 12/06/2009 MACHINING OF INTERCEPTOR COVER
3676 12/06/2009 DRILLING OF FI INTERCEPTOR CHEST
3676 12/06/2009 COVER FOR STUD REMOVAL
3676 12/06/2009 Cockenzie Power Station ISM intercept and other valve studs
3677 12/06/2009 Cockenzie PS NRV drill out one of twelve 2.1/8″ studs on …pcd 60 ft level boiler
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >