Reekie Experience
3559 27/03/2009 Alcan Lynemouth Power Station Unit 1 HP Turbine ISM steam valve stud drilling
3547 20/03/2009 B.P. SCARV WELD TEST 10.3/4″ O/DIA PIPE 6° MACHINED GROOVES
3548 20/03/2009 Transportation costs associated with delivery of final goods or equipment to Customer
3548 20/03/2009 HYJECTOR COVER
3548 20/03/2009 HYJECTOR BODY ‘Y’ PIECE
3532 13/03/2009 MS BASE PLATE 3600 MM LONG X 1000 MM WIDE
3532 13/03/2009 FABRICATED BASE FRAME 3600 MM LONG X 1000 MM WIDE
3524 05/03/2009 WEAR PLATE CARRIERS (MK 34)
3519 04/03/2009 hire of C4 or RDG182a to cold cut 738 od x 19 wt ductile iron water main in Edinburgh
3520 04/03/2009 NUT
3520 04/03/2009 DOOR
3520 04/03/2009 BODY
3520 04/03/2009 MV Wellservicer – Chamber 1 Equipment Hatch Sealing Thread/Face Inspection
3521 04/03/2009 Eggborough 5″ 23928W valve ism bore 6.8125″ dia x 1.1/4″ length 4.3/4″ reach from top face
3517 03/03/2009 hire of 1149 insitu boring equipment
3517 03/03/2009 BRAE ‘A’ PLATFORM ROLLS-ROYCE TURBINE BEARING/HOUSING MACHINING
3510 02/03/2009 1000 ONE PIECE UPPER FRAME MEDIUM COARSE TO ROUGH 1459.75 DIA FINSH : TURN 1182 MM DIA : CHECK TAPER AND WELD IF CUSTOMER REQUIRES
3510 02/03/2009 1000 AUTOSAND / EXTRA COARSE UPPER FRAME
3507 27/02/2009 LOWER BLOCK-SHEAVE SUPPORT STRUCTURE
3507 27/02/2009 LOWER BLOCK-LOWER BLOCK ARRANGEMENT
3507 27/02/2009 AFRAME-TOP-BOOM HOIST UPPER BLOCK
3507 27/02/2009 AFRAME-AFT. LEG UPPER PART STRUCTURE
3507 27/02/2009 AFRAME-FRONT LEG STRUCTURE GENERAL ARRANGEMENT
3507 27/02/2009 AFRAME-MAIN STRUCTURE GENERAL ARRANGEMENT
3507 27/02/2009 BOOM-JIB SHAFT LAYOUT SHEAVES 2
3507 27/02/2009 BOOM-JIB SHAFT LAYOUT SHEAVES 1
3507 27/02/2009 BOOM-UPPER PART SHAFT LAYOUT SHEAVES
3507 27/02/2009 BOOM-LOWER PART SHAFT LAYOUT SHEAVES 2
3507 27/02/2009 BOOM-LOWER PART SHAFT LAYOUT SHEAVES 1
3507 27/02/2009 SLEWING PLATFORM-SHAFT LAYOUT TROLLEY SHEAVES
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >