Reekie Experience
8975 02/10/2018 Centre Section (Item B)
8975 02/10/2018 Rear Section (Item A)
8969 01/10/2018 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS003
8972 01/10/2018 INSERT FOR MBX 2 UNIT FOR ALUMINIUM
8972 01/10/2018 HSS COBALT LH AND RH 3.6 DEG RAD BORE TOOL
8972 01/10/2018 HSS LH AND RH 45DEG BORE CHAMFERING TOOL
8972 01/10/2018 FACING TOOL 3MM RADIUS
8972 01/10/2018 UPDATE A330 GEAR RIB MACHINE PROTOTYPE
8967 28/09/2018 460 MM O/DIA X 348 MM I/DIA X 600 MM LONG TUBE TO TURN 406.5 O/DIA AND BORE 359.1 MM I/DIA
8967 28/09/2018 460 MM O/DIA X 348 MM I/DIA X 410 MM LONG TUBE TO TURN 406.5 O/DIA AND BORE 359.1 MM I/DIA
8967 28/09/2018 340 MM O/DIA X 176 MM I/DIA X 500 MM LONG TUBE TO TURN 244.5 O/DIA AND BORE 189.5 MM I/DIA
8967 28/09/2018 340 MM O/DIA X 176 MM I/DIA X 410 MM LONG TUBE TO TURN 244.5 O/DIA AND BORE 189.5 MM I/DIA
8967 28/09/2018 275 MM O/DIA X 179 MM I/DIA X 410 MM LONG TUBE TO TURN 219.1 O/DIA AND BORE 190.1 MM I/DIA
8967 28/09/2018 275 MM O/DIA X 179 MM I/DIA X 400 MM LONG TUBE TO TURN 219.1 O/DIA AND BORE 190.1 MM I/DIA
8968 28/09/2018 Drilling M42x4.5 Holes
8966 27/09/2018 HNB 7A Main CW Pump Casing, Insitu machining of lower wear ring landing face and counterbored face below
8962 26/09/2018 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS003
8963 26/09/2018 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS003
8959 25/09/2018 Gantry frame hinge bore rectification – Boring out welded in sleeves
8960 25/09/2018 M16 TO M20 ADAPTOR
8957 24/09/2018 St St Disc
8957 24/09/2018 MS Tube 273 OD x 257 ID x 1000mm Lg
8957 24/09/2018 MS Tube 197 OD x 183 ID x 1000mm Lg
8957 24/09/2018 Moduler Flask
8957 24/09/2018 St St Plug (Item 4)
8957 24/09/2018 Modular Flask Assy
8953 20/09/2018 Turnover Stand
8954 20/09/2018 Clyde Platform West Crane Ø2.8m Pedestal Cutting and Weld Prepping
8955 20/09/2018 Marathon East Brase Gripper Jacks Pin Drilling
8949 19/09/2018 SAAB MSN 318 G-LGNC Flap Hinge LH/RH Rework
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >