Reekie Experience
3445 22/01/2009 PIVOT ACTUATOR PIN LINK 40 MM WIDE X16 MM THK X 55 MM LONG
3446 22/01/2009 CPP Scapa Caisson Bhd ism bore 3mm inconel aside from bore of 8″ nb x 18mm wt stub
3446 22/01/2009 CPP Scapa Caisson Bhd ism bore 3mm inconel aside from bore of 8″ nb x 18mm wt stub
3443 21/01/2009 WEAR PLATE BOLTS (Mark 8)
3443 21/01/2009 WEAR PLATE BOLTS (Mark 15)
3444 21/01/2009 AXLE SHAFT REPAIRING TAPERED ENDS
3439 16/01/2009 MACHINING OF SCREW SHAFT JOURNAL 180MM DIA X 300MM LG
3440 16/01/2009 Subsea block top hub ISM 18.755 od x 23 degree taper x 0.745/.750 dp
3436 09/01/2009 Stena Leader on site machining of taper bore of rudder
3431 07/01/2009 CASING FOR ‘D’ FRAME PUMPS
3431 07/01/2009 ENGINE END BELL 3′-1 “X 9-1/8” O/ALL
MATSPEC BS 1452 G17 CAST IRON
3429 06/01/2009 MFR Sampson mast cap bearing drilling 32 holes from 30 to 39 dia thro 20 thk
3416 23/12/2008 RCW STRAINER LID
3415 19/12/2008 ALUMINIUM AIR SEAL RING
3406 16/12/2008 MOUNTING PINS
3398 05/12/2008 Y Axis Slideway
Standard Buoy Slew Ring Equipment
3398 05/12/2008 Z Axis Slideway
Standard Buoy Slew Ring Equipment
3398 05/12/2008 Standard Buoy Slew Ring Support Sub Assy
3398 05/12/2008 Worm Drive Assembly
Standard Buoy Slew Ring Equipment
3398 05/12/2008 Mounting Bracket
Standard Buoy Slew Ring Equipment
3398 05/12/2008 RAMH200 MK2 GEARBOX ASSEMBLY
3398 05/12/2008 Check Equipment, Assemble Equipment, Pack for Shipping
3398 05/12/2008 Back Spot Facing Equipment
Standard Buoy Slew Ring Equipment
includes Drill location plate, fastners, back spot facer and one set of tooling for 88dia
3398 05/12/2008 7.5KW 30L @ 138Bar HYDRAULIC POWER PACK WITH LV REMOTE OFF SWITCH
C/W 1/2″ HOSES AND FITTINGS
3398 05/12/2008 15KW 50L @ 138Bar HYDRAULIC POWER PACK WITH LV REMOTE OFF SWITCH
C/W 3/4″ HOSES AND FITTINGS
3398 05/12/2008 DR1 DRILLING MACHINE
3395 03/12/2008 SPLINED CASTING
3395 03/12/2008 SPLINED SHAFT 11″ O/DIA X 29 ” O/ALL
3391 01/12/2008 ENGINE END BELL 3′-1 “X 9-1/8” O/ALL
MATSPEC BS 1452 G17 CAST IRON
3391 01/12/2008 DETAIL OF SUCTION END BELL MACHINED TO ITEM 2 DIMENSION
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >