Reekie Experience
3274 09/09/2008 DSAR-5 UPPER HATCH FLANGE DOG MACHINING
3271 04/09/2008 Forging Hammer Column Base 3200 x 2200mm area to mill
3266 01/09/2008 ST ST SPACERS 203.2 MM O/DIA X 177.8 MM I/DIA X 16 MM THK
3266 01/09/2008 PULLEY SHAFT & ASSY
3266 01/09/2008 ST ST END CAPS 203.2 MM O/DIA X 20 MM THK
3268 01/09/2008 Mullardoch hydro turbine to generator speed increase gearbox ISM output shaft bore
3263 28/08/2008 GENERAL ARRANGEMENT
3264 28/08/2008 ADDITIONAL 3-OFF 6″NB FLANGES TO BE MACHINED PRIOR TO RE-GLASSING
3258 25/08/2008 AL.BRZ.2. PADS 1.1/4″ WIDE X 3/8 ” THK
3253 22/08/2008 RFA Fort Geroge port stern tube insitu bore out Railko on true centreline approx 5mm aside to finish 610 dia thro 1070 length
3248 20/08/2008 MACHINING OF SCREW SHAFT JOURNAL 180MM DIA X 300MM LG
3250 20/08/2008 BDAX 82-445 stator feet holes ISM to open out twelve holes from 65 to 90 mm dia thro 65thk feet uphand
3251 20/08/2008 ism MV Alliance – thread repair on 3 Kelly’s (Gas Bottles)
3251 20/08/2008 DRILLED PLUG ITEM ‘D’
3251 20/08/2008 M141 X 2.5 PITCH SCREWED RING
3251 20/08/2008 M141 X 2.5 PITCH SCREWED RING
3246 19/08/2008 R8 Model R8 Portable Facing, Turning and Weld Preparation Mchine Tool Internal Location from 79.3mm to 196mm diameters
3246 19/08/2008 R3 Portable Reekie Tube End Profiling Machine Tool Internal Location from 36.5mm to 79.3mm Diameters
3246 19/08/2008 R3 portable tube end profiling machine tool
3247 19/08/2008 BANJO RETAINING CAP
3247 19/08/2008 SKIRT DEWATERING FLANGE 1
3247 19/08/2008 SKIRT DEWATERING ADAPTOR
3237 08/08/2008 Transportation costs associated with delivery of final goods or equipment to Customer
3237 08/08/2008 HYJECTOR COVER
3237 08/08/2008 HYJECTOR BODY ‘Y’ PIECE
3238 08/08/2008 Connah’s Quay ISM two IP and HP’s to remove valve seat retaining screws 2×20 xM24 2x16xM20
3233 05/08/2008 C.S. BRUSH PLOUGHS c/w FLATS and SCREWS
3229 29/07/2008 B210 HEAT EXCHANGER DIVISION PLATE REPAIR
3228 25/07/2008 LONGANNET PS : UNIT 3 SNRV97 AND FNRV211
3222 21/07/2008 hire of MM500i from 20th December until return
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >