Reekie Experience
3200 30/06/2008 SUPPLY STUB (Ref 1E)
3200 30/06/2008 TUBE STUBS (Ref 1D)
3200 30/06/2008 END CAPS (Ref 1C)
3200 30/06/2008 INSPECTION BRANCH (Ref 1J)
3200 30/06/2008 DRAIN CONNECTION (Ref 1H)
3200 30/06/2008 INSPECTION STUB (Ref 1G)
3200 30/06/2008 SUPPLY PIPE (Ref 1F)
3200 30/06/2008 STUBS (Ref 1E)
3200 30/06/2008 STUBS (Ref 1D)
3200 30/06/2008 END CAP (Ref 1C)
3200 30/06/2008 INSPECTION BRANCH (Ref 1J)
3200 30/06/2008 DRAIN CONNETION (Ref 1H)
3200 30/06/2008 INSPECTION STUB (Ref 1G)
3200 30/06/2008 SUPPLY PIPE (Ref 1F)
3200 30/06/2008 STUB (Ref 1E)
3200 30/06/2008 STUB (Ref 1D)
3200 30/06/2008 HEADER END CAPS (Ref 1C)
3200 30/06/2008 HEADER END CAPS (Ref 1C)
3194 27/06/2008 1000 ONE PIECE UPPER FRAME MEDIUM COARSE TO ROUGH 1459.75 DIA FINSH : TURN 1182 MM DIA : CHECK TAPER AND WELD IF CUSTOMER REQUIRES
3193 25/06/2008 BRUSH PLOUGH CARRIERS c/w MK1,2,3,12
3193 25/06/2008 MACHINING OF UPPER AIR SEAL RING
3191 24/06/2008 1000 ONE PIECE UPPER FRAME MEDIUM COARSE TO ROUGH 1459.75 DIA FINSH : TURN 1182 MM DIA : CHECK TAPER AND WELD IF CUSTOMER REQUIRES
3185 23/06/2008 WEAR PLATE Mk ‘B’
3185 23/06/2008 WEAR PLATE Mk ‘B’
3185 23/06/2008 WEAR PLATE Mk ‘A’
3185 23/06/2008 WEAR PLATE Mk ‘B’
3189 23/06/2008 YOKE COVER PLATE 1885 MM O/DIA X175 MM O/ALL
MAT SPEC :MS FABRICATION
3178 18/06/2008 Drax Power Station Unit 1 insitu machining of various components
3177 17/06/2008 LOCH DOON REPLACEMENT ROLLER PATH
3177 17/06/2008 LOCH DOON, INTAKE GATE ROLLERPATH MACHINING
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >