Reekie Experience
3028 25/02/2008 MS BOTTOM SECTION (AS DRAWN ) 300 MM WIDE X3475 MM O/ALL (REF10)
3029 25/02/2008 ism Fishery Protection vessel, dry dock grangemouth, stern tube, m/c outboard face to clean up flat and perpindicular to cl
3030 25/02/2008 Transportation costs associated with delivery of final goods or equipment to Customer
3030 25/02/2008 HYJECTOR VENTURI
3022 20/02/2008 MV NANCY GLEN STERNTUBE BUSH REBORING
3021 19/02/2008 LONGANNET PS : ISM F112 BONNET FACE SPIGOTS AND BOLT HOLES
3016 18/02/2008 CUP (MK 16)
3017 18/02/2008 WEAR PLATE BOLT c/w NUTS
3018 18/02/2008 CI HANDWHEEL (REF 5)
3018 18/02/2008 REJECT DOOR SPINDLES
3019 18/02/2008 INSPECTION NIPPLES
3019 18/02/2008 MOUNTING PINS
3019 18/02/2008 MOUNTING PINS
3020 18/02/2008 AIR SEAL RING
3011 13/02/2008 RB60 FEEDBOX ASSEMBLY
3011 13/02/2008 RB60/RBXX49 BORING MACHINE
3012 13/02/2008 LONGANNET PS : ISM SD4 BORE SEALING RING AREA 11.1/8″ DIA X 3.1/2″ LG
3012 13/02/2008 LONGANNET PS : ISM CNRV147 MATING PIPEWORK FLANGES 10″NB
3012 13/02/2008 LONGANNET PS : ISM F105 F111 REMOVE UP TO 12-OFF 3/4″BSF STUDS FROM EACH VALVE
3012 13/02/2008 LONGANNET PS : ISM F185 TOP FACE 9.76″ BORE
3008 12/02/2008 LONGANNET PS : ISM Valve number Unit 4 FNRV 19,23 & 24 ( 8″ 37720w ) SEAT RE-PROFILING
3009 12/02/2008 125 NB BST ‘S’ SPECIAL SLIP ON FLANGE 11.1/4″ O/DIA X 5.5/8″ I/DIA X 1″ THICK COMPLETE WITH 12 OFF HOLES 1.3/4″ DIA ON A 9.1/4″ P.C.D.
3003 07/02/2008 BIFURCATION PIECES 68 MM O/DIA X 300 MM O/ALL
MAT SPEC :BS1503-223-490 (FORGING)
3004 07/02/2008 AKPO additional costs due to being bumped from Friday’s flight
3004 07/02/2008 hire of Reekie operator to use SBM owned (reekie supplied) slew ring seating machining equipment to machine one pair of slew rings seats for AKPO
3004 07/02/2008 hire of Reekie operator to use SBM owned (reekie supplied) slew ring seating machining equipment to machine one standard buoy in Nigeria
2999 06/02/2008 ST ST THERMOCOUPLE BLOCK 16 MM X 13 MM X 55 MM O/ALL
2997 05/02/2008 40 MM A/FLATS HEX SHAFT ITEM 1 X 470 MM LONG MACHINED AS PER SKETCH
2997 05/02/2008 M10 X 3/8″ N.P.T.F. 25 MM A/FLATS HEX FITTING ITEM 3 MACHINED AS PER SKETCH
2997 05/02/2008 HEX BOLT 40MM A/FLATS X 125 MM LONG ITEM 4 MACHINED AS PER SKETCH
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >