Reekie Experience
2997 05/02/2008 30 MM HEX BOLT X 95 MM LONG ITEM 2 MACHINED AS PER SKETCH
2995 04/02/2008 AUXILIARY BOILER FEED PUMP MACHINING AT LONGANNET
2989 31/01/2008 RELIEF GATE
2986 30/01/2008 DRYER COLUMN
2980 29/01/2008 CR MO TRANSITION RESTRAINT 31.95 MM O/DIA X 270 MM O/ALL
2980 29/01/2008 ST ST PLUG 40 MM O/DIA X 35 MM LONG (ITEM 2 )
2980 29/01/2008 ST ST TRANSITION RESTRAINT 41 MM O/DIA X 33 MM I/DIA X 270 MM LONG (ITEM 1 )
2981 29/01/2008 ism Medway 2 Engine Cylinder Liner; check alignment, m/c location faces if required, possibly m/c liner
2982 29/01/2008 Transportation costs associated with delivery of final goods or equipment to Customer
2982 29/01/2008 HYJECTOR BODY ‘Y’ PIECE
2983 29/01/2008 DESIGN, DEVELOP, MANUFACTURE AND TEST : AVOID CO2 PIPES WHILE MACHINING
2983 29/01/2008 DRILLING MACHINE – WORK RELATING TO DESIGN, DEVELOPMENT, TESTING, MANUFACTURE AND TRAINING
2983 29/01/2008 GLAND PLATE STUD MACHINING AND THREAD TESTING AND DEVELOPMENT
2983 29/01/2008 T slot in way of spacer blocks to sketch received 10th June 2008
2983 29/01/2008 costs of design, parts, material for top can cover plate machining to be invoiced for March
2983 29/01/2008 outer can window cutting machine
2983 29/01/2008 DESIGN, DEVELOP, MANUFACTURE AND TEST VERTICAL DRILLING MACHINE TO SECURE SPACER BLOCKS
2984 29/01/2008 TAILRACE STOPLOGS
2974 25/01/2008 CYLINDER CARRIAGE RAIL
2976 25/01/2008 SHEAR FALT 4200 MM LONG X 75 MM WIDE X 25 MM THICK
2973 23/01/2008 PEDESTAL FOR SCANNER
2972 22/01/2008 DR50 LOCATION PLATE FOR 420 PCD
2972 22/01/2008 PUTFORD TERMINATOR – PME No.2 39X3MM STUD REMOVAL X 2
2969 21/01/2008 BRUSH PLOUGH CARRIERS c/w MK1,2,3,12
2969 21/01/2008 MACHINING OF UPPER AIR SEAL RING
2970 21/01/2008 C.S. BRUSH PLOUGHS c/w FLATS and SCREWS
2967 18/01/2008 Modifications to Safety valve seat profiling machine
2965 17/01/2008 Transportation costs associated with delivery of final goods or equipment to Customer
2965 17/01/2008 HYJECTOR BODY ‘Y’ PIECE
2964 16/01/2008 ST ST COLLAR60 MM O/DIA X 30.5 MM I/DIA X30 MM THK
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >