Reekie Experience
2964 16/01/2008 ST ST GUIDE BLOCKS 169 MM X200 MM X50 MM O/ALL (ITEM 022 )
2960 14/01/2008 Extra work, drill out four holes from 1.1/8″ 8 UN to 1.1/4″ 8 UN in very confined space
2960 14/01/2008 waiting time
2960 14/01/2008 RV17 inboard face, insitu machine to clean up 130 mm id x 280 mm od face flat in confined space
2961 14/01/2008 Transportation costs associated with delivery of final goods or equipment to Customer
2961 14/01/2008 HYJECTOR COVER
2961 14/01/2008 HYJECTOR BODY ‘Y’ PIECE
2953 09/01/2008 HUB STRUT
2953 09/01/2008 NOZZLE MACHINING
2951 08/01/2008 CLOSURE STOPLOG ASSEMBLY 2850 MM X 2612 MM X410 MM O/ALL
MAT SPEC :MS/ST.ST FABRICATION
2949 07/01/2008 supply of R2 or other for weld prepping 24.31 id x 33.5 mm od pipes
2944 20/12/2007 BLANK FLANGE 1092 MM O/DIA X108 MM O/ALL
2944 20/12/2007 BACKING FLANGE 1092 MM O/DIA X 780 MM I/DIA X 108 MM THK
2940 17/12/2007 SINGLE TANK ASSEMBLY
2941 17/12/2007 OUTLET LEG BIFURCATION
2941 17/12/2007 INLET LEG BIFURCATION
2939 14/12/2007 3B FABRICATED ATOMISER BODY
2939 14/12/2007 EXTERNAL FLANGE FOR CORE AIR TUBE
2937 12/12/2007 Volantis, A Frame Deck Pads ism of shims
2935 11/12/2007 HIRE OF R90
2936 11/12/2007 GEARED SPINDLE ASSEMBLY
2934 10/12/2007 MATCH BORE A 4″ SCH160 INCONNEL PIPE TO SCH80 15MM DEEP WASHED AWAY AT 15 DEG
2933 07/12/2007 Barking Power Station generator insitu machine to remove further 100mm from bottom (back) face of 55mm wide x 500 long x 200 dp tongue in 105mm wide slot
2929 06/12/2007 ADDITIONAL WORK CARRIED OUT ON POWER PACK TANKS
FILED UNDER SO2589
2926 04/12/2007 Machining of Blank Flange 53 3/4 ” OD
2926 04/12/2007 ISM Roche Steam Generator Flange 29″ ID. Bay 2 Babcock Renfrew
2927 04/12/2007 BODY CENTRE PIECE
2928 04/12/2007 MBFP GEARBOX ROTOR BUSHING
2918 30/11/2007 Barking Power Station generator insitu machine to remove further 100mm from bottom (back) face of 55mm wide x 500 long x 200 dp tongue in 105mm wide slot
2916 29/11/2007 HYDRAULIC MOTOR SHAFT REMACHINING TO SUIT HAGLAND TAPER LOCK
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >