Reekie Experience
2915 27/11/2007 Transportation costs associated with delivery of final goods or equipment to Customer
2915 27/11/2007 HYJECTOR BODY ‘Y’ PIECE
2913 23/11/2007 MATERIAL COSTS FOR DIAPHRAGM
2913 23/11/2007 ARRANGMENT & DETAIL OF SPRAY NOZZLE FOR SUPERHEATER ATTEMPERATOR
2913 23/11/2007 NOZZLE CONNECTION
2912 21/11/2007 DRILLING OF 9-OFF M24 FITTED BOLTS TO ALLOW REMOVAL OF A GEARWHEEL
2908 19/11/2007 Transportation costs associated with delivery of final goods or equipment to Customer
2908 19/11/2007 HYJECTOR BODY ‘Y’ PIECE
2911 19/11/2007 12″N/B ADAPTOR PLATE 482.6 MM O/DIA X 292 MM I/DIA X 50 MM THK
2911 19/11/2007 12″ – 16″ ADAPTOR PLATE 596.9 MM O/DIA X 327.15 MM I/DIA X 50 MM THK
2911 19/11/2007 12″ – 10″ ADAPTOR PLATES 482.6 MM O/DIA X 276.35 MM I/DIA X 50 MM THK
2911 19/11/2007 10″ -12″ ADAPTOR PLATE 459 MM O/DIA X 276 MM I/DIA X50 MM THK
2904 15/11/2007 BOTTOM SILL MEMBER R/H (REF031)
252.5 MM WIDE X 2800 MM LONG
2904 15/11/2007 BOTTOM SILL MEMBER L/H (REF 010)
252.5 MM WIDE X 2800 MM LONG
2904 15/11/2007 UPPER SIDE MEMBER (OPP HAND) REF014
425 MM WIDE X 2800 MM LONG
2904 15/11/2007 UPPER SIDE MEMBER (AS DRAWN) REF013
425 MM WIDE X 2800 MM LONG
2904 15/11/2007 LOWER SIDE MEMBER (OPP HAND) REF 012
425 MM WIDE X 2800 MM LONG
2904 15/11/2007 LOWER SIDE MEMBER (AS DRAWN) REF 011
425 MM WIDE X 2800 MM LONG
2902 13/11/2007 CAT 963C WASTE HANDLER – SPREADER BEAN LUG BORING
2898 08/11/2007 D4H TRACTOR – C-FRAME ATTACHMENT BORE MODIFICATION
2900 08/11/2007 RIB SPACER 292 O/D X 150 MM BORE X 186 MM LONG COMPLETE WITH 349 MM RAD ONE END
2900 08/11/2007 RIB PLASTIC NOZZLE ITEM 10
2900 08/11/2007 RIB INSERT ITEM 11
2900 08/11/2007 LEP SPACER 506 MM O/D X 320 BORE X 238 MM LONG COMPLETE WITH 368 MM RAD ON ONE END
2900 08/11/2007 LEP NYLON NOZZLE ITEM 13
2900 08/11/2007 LEP INSERT ITEM 21
2894 05/11/2007 Ø6.0″ AGITATOR SHAFT CUTTING
2891 01/11/2007 ST ST WASHER 70 MM O/DIA X 32.5 MM I/DIA
2891 01/11/2007 ST ST WASHER 64 MM O/DIA X 42 MM I/DIA
2891 01/11/2007 ST ST WASHER 70 MM O/DIA 31 MM I/DIA
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >