Reekie Experience
2891 01/11/2007 PIN SPACER100 MM O/DIA X 20 MM O/ALL
2891 01/11/2007 PROPSHAFT KEY 10 MM X 8 MM X 84.75 MM LG
2891 01/11/2007 ST ST ACTUATOR PIN 30 MM O/DIA X 52.50 MM O/ALL
2891 01/11/2007 MOTOR TO G/BOX COUPLING KEY
30 MM X 10 MM X 8 MM
2886 30/10/2007 MV LORD OF THE ISLES – AFT THEN FWD RAMP OUTER HINGES (50MM THK OUTER LUGS)
2885 29/10/2007 HYDRAULIC TUBE HOUSING
2880 23/10/2007 16″nb PIPE X 9.5mm WT X 5.9M LONG : WELD PREP ONE END ONLY 37º
2880 23/10/2007 24″nb PIPE X 9.5mm WT X EITHER 5.0M OR 5.7M LONG : WELD PREP ONE END ONLY 37º
2881 23/10/2007 DR1 MK4 LOCATION PLATE
2881 23/10/2007 DR1 with MK4 Stand
2881 23/10/2007 1.75″ DIA. BACK SPOTFACER
2881 23/10/2007 45 – 88 DIA BACK SPOT FACING TOOL
2876 19/10/2007 316 STAINLESS BOLLARD
2877 19/10/2007 GIRDER SHEAR PLATE 75 MM X 25 MM X4200 MM LG
MAT SPEC : MILD STEEL
2871 18/10/2007 10″ O/DIA X 22.2 MM WALL X 600 MM LONG COUNTERBORED 173 MM LONG EACH END
2871 18/10/2007 6″ O/DIA X 15.9 MM WALL X 600 MMM LONG COUNTERBORED 173 MM LONG EACH END
2871 18/10/2007 6″ O/DIA X 15.9 MM WALL X 3600 MM LONG COUNTEREDBORED 173 MM LONG EACH END
2871 18/10/2007 6″ O/DIA X 15.9 MM WALL X 3850 MM LONG COUNTERBORED 173 MM LONG ONE END
2865 12/10/2007 Slew ring machining equipment, new parts for AKPO
2866 12/10/2007 CREATING RECESS ON 1-OFF 8″ AND 2-OFF 16″ NB FLANGES TO REMOVE GLASS LINING
2861 10/10/2007 CASING/BOSS ASSEMBLY
2861 10/10/2007 Sonar Tilt Mechanism comprising of:
2856 08/10/2007 10″ O/DIA X 22.2 MM WALL X 500 MM LONG BORED THRO
2856 08/10/2007 6″ O/DIA X 15.9 MM WALL X 500 MM LONG BORED THRO
2859 08/10/2007 IMPELLER REGULATING ROD
2859 08/10/2007 WEAR PLATE BOLTS (Mark 15)
2850 04/10/2007 HIRE OF 1149
2852 04/10/2007 Side Thrust Tilt Mech (Stbd)
2852 04/10/2007 Side Thrust Tilt Mech (Port)
2853 04/10/2007 Bow plane Tilt Mechanism (Port)
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >