Reekie Experience
2767 09/08/2007 SEAL ASSEMBLY HOUSING
2767 09/08/2007 HUB MOUNTING FLANGE
2767 09/08/2007 PROPELLER SHAFT
2767 09/08/2007 POD BEARING HOUSING
2767 09/08/2007 THRUST BEARING
2767 09/08/2007 POTENTIOMETER HUB MOUNT
2767 09/08/2007 ACTUATOR PIN
2767 09/08/2007 ACTUATOR MOUNTING
2767 09/08/2007 THRUSTER BEARING
2767 09/08/2007 FAIRING THREADED INSERT
2767 09/08/2007 NOZZLE YOKE
2767 09/08/2007 STEERING LINKAGE
2767 09/08/2007 UPPER SHAFT
2767 09/08/2007 LOWER SHAFT 124 MM DIA X 118 MM O/ALL
2767 09/08/2007 GEARBOX HOUSING
2767 09/08/2007 MOTOR TO GEARBOX COUPLING
2767 09/08/2007 BIBS ADAPTER BLOCK
2767 09/08/2007 BEARING HOUSING
2760 07/08/2007 1300 CRUSHER
2761 07/08/2007 65150-P18 DIAPHRAGM PLATE
2754 01/08/2007 Hopkinsons 200mm nominal figure M239420W v/v, insitu machine 200 mm dia bore x 130
mm length
2754 01/08/2007 TURNBUCKLE SPECTACLE RIGHT HAND 1.3/4″ B.S.F THREAD COMPLETE WITH BEARING & INTERNAL CIRCLIPS
2751 30/07/2007 STIRRUP PADS (MK3)
2751 30/07/2007 STIRRUP (MK1)
C/W LOCKING PLATES (MK9) & NUTS (MK10 )
2749 27/07/2007 On site machining of main column flange of glassed vessel
2740 19/07/2007 P.A. TUBE CENTRALISING PIN
2744 19/07/2007 STUB SHAFT
2744 19/07/2007 MUFF COUPLING
2736 18/07/2007 Longannet, F105, a 12″ nb v/v 2490w, HP heater
2736 18/07/2007 Longannet, 8″ NRV, reprofiling v/v seat, refer to Hopkinsons 31141-861 B and 32236-131 A
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >