Reekie Experience
2736 18/07/2007 Longannet, studs to be removed
2736 18/07/2007 Longannet, 2 off v/v’s 198 level with 2 off studs to be removed
2736 18/07/2007 Longannet machining of non return valve SNRV 4″ nb Unit 2 on 148 level
2736 18/07/2007 Longannet machining of non return valve SNRV 6″ nb Unit ? on 198 level
2736 18/07/2007 Longannet auxiliary feed pump, ISM 23″ id x 25″ od face inside pump body
2737 18/07/2007 MACERATOR SHAFT – INSITU REPAIR OF BEARING DIA Ø120MM
2737 18/07/2007 STEEL SLEEVE
2735 17/07/2007 Ø60MM ID CAISSON PAD-EYE MACHINING
2734 16/07/2007 DAVIT WASHER
2734 16/07/2007 DAVIT CAPSTAN NUT
2734 16/07/2007 DAVIT MAST SR GUARD FILTER FPSO GIMBOA
2725 11/07/2007 CABLE TOP RELEASE SEALED BELL INSERT
2725 11/07/2007 DIVING BELL BORE AND FACE MACHINING
2726 11/07/2007 M33 X 2MM PITCH X 1.5D HELICOIL INSERT
2726 11/07/2007 REPAIR TO RR-BERGEN KV ENGINE, CRANKSHAFT TO BALANCE WEIGHT BOLT. ONBOARD OCEAN NOMAD
2720 09/07/2007 MACHINING OF ISOSTATIC PRESSURE VESSEL SEAL TO SUIT SIZE TAKEN FROM SITE
2720 09/07/2007 ISOSTATIC PRESSURE VESSEL – MACHININING OF WORN Ø30″ DIA SEALING FACE
2721 09/07/2007 SEDCO 706, DRILLIGN OUT TO REMOVE PINS
2718 06/07/2007 LID SEAL GROOVE 5mm WIDE X 3.5mm DEEP
2718 06/07/2007 TANK LID
2718 06/07/2007 2.0 MVA TRANSFORMER TANK
2712 04/07/2007 GROOVING TOOL TO SUIT GS HYDRO RETAINING RING GROOVE (6.0mm RADIUS NOSE)
2712 04/07/2007 GROOVING TOOL TO SUIT GS HYDRO RETAINING RING GROOVE (4.0mm RADIUS NOSE )
2712 04/07/2007 HIRE OF R8F TO SUIT 168.3MM OD X 154MM ID PIPE C/W R3 TOOLING
2713 04/07/2007 hire of Reekie operator to train SBM personnel in operation and maintenance of Reekie SBM slew ring seating machining equipment and machine seats on one deep water buoy
2714 04/07/2007 Connah’s Quay IP & HP, ISM to remove seized M20 & M24 v/v seat retaining screws, refer to SO2023, E2452
2715 04/07/2007 milling, drilling, tapping of governor end pedestal face for earthing bush
2715 04/07/2007 drilling holes feet of pedestals
2715 04/07/2007 HP turbine casing, casing studs
2715 04/07/2007 HP bottom inner cylinder
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >