Reekie Experience
2640 29/05/2007 SHEAR FRAMES
2641 29/05/2007 tug willowgarth ism azithmuth thruster, steering bearing housings
2636 28/05/2007 ism 30″nbx5/8″ wt pipe at Livingston, two cuts per v/v, two v/v’s
2632 24/05/2007 MS FABRICATED BASE FRAME 3000 MM LG X 1000 MM WIDE
MAT SPEC : MILD STEEL
2632 24/05/2007 MS FABRICATED BASE FRAME 3700 MM LG X 1000 MM WIDE
MAT SPEC : MILD STEEL
2630 23/05/2007 STIRRUP PADS (MK3)
2630 23/05/2007 STIRRUP (MK1)
C/W LOCKING PLATES (MK9) & NUTS (MK10 )
2631 23/05/2007 Shell Sean Compression, ISM crane pedestal
2625 22/05/2007 FH ELLIPTICAL DOOR MACHINING
2626 22/05/2007 Longanner Unit 1, ism two 8″ id x 10.1/2″ rf of 14.1/2″ od flanges
2623 21/05/2007 W.GRANTS DISTILLARY, GIRVAN. PRESS END PLATE SUPPORT PAD MACHINING
2620 17/05/2007 MV Stena Seafarer, ism ship’s tube for port rudder
2615 15/05/2007 WEAR PLATE BOLT c/w NUTS
2616 15/05/2007 BRUSH PLOUGH CARRIERS c/w MK1,2,3,12
2609 11/05/2007 LINTEL MEMBER
2609 11/05/2007 SILL MEMBER
2609 11/05/2007 SIDE MEMBER FOR MAINTENANCE LOG
2602 10/05/2007 REPLACEMENT OF A 8″ X 3.1/2″ X 3/8″ SECTION OF BRASS SEALING STRIP X 2 PER GATE
2602 10/05/2007 VAICH INTAKE GATE ROLLER PATH MACHINING AND REPLACEMENT
2602 10/05/2007 100×10.5×1000 ROLLER PATH WITH R50 RADIUS
2602 10/05/2007 100X10.5X1000 ROLLER PATH
2602 10/05/2007 VAICH TUNNEL FIXED ROLLER CONTROL GATE ROLLER PATH REFURBISHMENT. E1352.2.2.8
2605 10/05/2007 tug Willowgarth, ISM asimuth thruster seating, ISM 3000 id x 3400 od seating
2601 09/05/2007 Eggborough Power Station, FGD damper cylinder, ism to remove two 100mmdia pins, one 200 mm long, one 762mm long
2598 07/05/2007 TUG Willowgarth, azimuth thruster seating, 3000 id x 3400 od check for flatness
2592 03/05/2007 Sampson Mast, ISM interface ring, core drill thirty two holes from 30 dia to 39 dia thro 20thk steel interface ring
2593 03/05/2007 TOP GUIDE RAIL (ITEM 018)
2593 03/05/2007 MIDDLE GUIDE RAIL (ITEM 017)
2593 03/05/2007 BOTTOM GUIDE RAIL (ITEM 016)
2589 01/05/2007 UPPER TANK (STBD SIDE )
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >