Reekie Experience
2589 01/05/2007 WATER DETECTOR MOUNT PLATE
2589 01/05/2007 DIFFUSER ADAPTOR
2589 01/05/2007 PUMP INLET TUBE ASSY
2589 01/05/2007 STUB SHAFT
2589 01/05/2007 MUFF COUPLING
2589 01/05/2007 ACCESS COVER 100 MM DIA X6 MM THK
2589 01/05/2007 PUMP OUTLET BLOCK
2589 01/05/2007 SEAL HOUSING
2589 01/05/2007 MOTOR MOUNTING POT (PORT SIDE )
2589 01/05/2007 MOTOR MOUNTING POT (STBD SIDE )
2589 01/05/2007 TANK COVER
2589 01/05/2007 LOWER TANK
2589 01/05/2007 UPPER TANK (PORT SIDE )
2589 01/05/2007 MANIFOLD PLATE (STBD SIDE )
2589 01/05/2007 PUMP ADAPTOR BLOCK
2589 01/05/2007 MANIFOLD PLATE (PORT SIDE)
2589 01/05/2007 WATER DETECTOR MOUNT RODS
2590 01/05/2007 CUP FOR PUSH ROD (REF 16)
2585 30/04/2007 MOUNTING PINS
2587 30/04/2007 RUNNING WASHER
2587 30/04/2007 OUTER GEAR RACK
2587 30/04/2007 HINGED HANDLE
2587 30/04/2007 PINION
2587 30/04/2007 SHAFT CAP
2587 30/04/2007 HINGE AXLE
2587 30/04/2007 FIXING NUT
2587 30/04/2007 PINION SHAFT
2588 30/04/2007 M56 SHAFT
2588 30/04/2007 MAIN CABLE RELEASE THRU SHAFT
2588 30/04/2007 DIVING BELL – BORING OF THE MAIN CABLE RELEASE PENETRATION FROM Ø40mm DIA TO APPROX Ø42.0mm DIA THRO 50mm THK
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >