Reekie Experience
2563 19/04/2007 Hire of R3000 from 020707 to 220707 (3 days @ £675 per day in use and 12 working days @ £225 per day idle)
2563 19/04/2007 Hire of R3000 from 180607 – 010707 (3 days @ £675 per day in use and 7 working days @ £225 per day idle)
2563 19/04/2007 Hire of R3000 from 110607 – 170607 (5 working days @ £225 per day idle)
2563 19/04/2007 Hire of R3000 from 040607 – 100607 (5 working days @ £225 per day idle)
2563 19/04/2007 Hire of R3000 from 210507 – 030607 (10 working days @ £225 per day idle)
2563 19/04/2007 Hire of R3000 from 040507 – 200507 (10 working days @ £225 per day idle)
2563 19/04/2007 Hire of Reekie R3000 or other suitable insitu machining equipment for machining 1720 id x 1920 od flange faces
2564 19/04/2007 HIRE OF AX012 FOR OFFSHORE
2557 18/04/2007 REFURBISHMENT OF END POSTS
2559 18/04/2007 Ø800mm STEEL AND DUCTILE IRON PIPE CUTTING AT SEWAGE TREATMENT PLANT IN EASTLEY, NR SOUTHAMPTON
2547 13/04/2007 TOOLHOLDER FOR 3/4″ SECTION TOOLS ON 75MM WIDE SLIDE
2547 13/04/2007 3/4″ x 1/2″ SECTION GROOVING TOOL TO SUIT GS HYDRO RETAINING RING GROOVE (10.0mm RADIUS NOSE )
2547 13/04/2007 2-AXIS SLIDEWAY SYSTEM TO SUIT NB CLAMSHELL TYPE MACHINE
2548 13/04/2007 1400 MM O/DIA X 1200 MM I/DIA X 50 MM THICK FLANGE
2544 11/04/2007 BEARING BRACKET SCREWED ROD
2544 11/04/2007 SPHERICAL WASHERS (ITEM 9) ‘C’ TYPE & ‘D’
2544 11/04/2007 LARGE WASHERS
2544 11/04/2007 WORM & WHEEL REDUCTION GEARBOX SIZE 70. 60:1 REDUCTION (FLANGED INPUT TYPE)
2545 11/04/2007 extra work, machining addtional 5mm from both 85 wide x 10,300 long faces
2545 11/04/2007 Manchester Ship Canal, Latchford Irlam Barton sluice gate, ism one pair of 85mm wide x 10,300 long roller paths
2542 10/04/2007 DAVIT WASHER
2542 10/04/2007 DAVIT CAPSTAN NUT
2542 10/04/2007 DAVIT CAPSTAN NUT
2542 10/04/2007 DAVIT MAST
2542 10/04/2007 6525 SERIES HOUSING DAVIT MAST
2542 10/04/2007 DAVIT MAST SR GUARD FILTER FPSO GIMBOA
2542 10/04/2007 PHOSPHER BRONZE WASHER DAVIT WASHER
2539 06/04/2007 1000 ONE PIECE UPPER FRAME MEDIUM COARSE TO ROUGH 1459.75 DIA FINSH : TURN 1182 MM DIA : CHECK TAPER AND WELD IF CUSTOMER REQUIRES
2535 05/04/2007 ROLLER SHAFT c/w 28 wide keyway (ITEM 1)
NOT supplied with Gear Ring
2536 05/04/2007 GUIDE FUNNEL Ø1292MM DIA MACHINING
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >