Reekie Experience
2147 21/08/2006 RELIEF GATE
2148 21/08/2006 MOUNTING PINS
2150 21/08/2006 HIRE OF NB4, C/W 1/2″ & 1″ FEET AND PARTING OFF TOOLING
2151 21/08/2006 PLAIN AXLE ASSEMBLY
2151 21/08/2006 ADJUSTER SHAFT
2151 21/08/2006 ADJUSTER BARREL
2151 21/08/2006 STUB AXLE
2151 21/08/2006 MOUNTING TUBE
2151 21/08/2006 CONTROL TUBE
2144 18/08/2006 CABLE LAYING MODULE – OPENING OUT HOLES FROM Ø62 TO Ø75MM DIA
2146 18/08/2006 SUPERHEATER END CAP TYPE 2
2146 18/08/2006 SUPERHEATER END CAP TYPE 1
2142 17/08/2006 Longannet, boiler control NRV, insitu drill out one 2.1/4″ 6 tpi whit form stud,one of 12 on 18″ pcd
2139 16/08/2006 GROOVING TOOL TO SUIT GS HYDRO RETAINING RING GROOVE (8.0mm RADIUS NOSE )
2139 16/08/2006 30º WASH AWAY TOOL TO SUIT R8 GROOVE
2139 16/08/2006 Hire of NB10, NB16 and NB24 along with tooling
2134 15/08/2006 1000 ONE PIECE UPPER FRAME MEDIUM COARSE TO ROUGH 1459.75 DIA FINSH : TURN 1182 MM DIA : CHECK TAPER AND WELD IF CUSTOMER REQUIRES
2134 15/08/2006 REPLACEMENT RING
2131 14/08/2006 PINION SHAFT
2131 14/08/2006 FLANGE HUB
2131 14/08/2006 LANCE HUB
2131 14/08/2006 WORMSHAFT
2132 14/08/2006 Lefort 600 tonne shear, redrill and retap two sets of eight M48x5p to M52x5p or for M48x5p x 1.5D helicoils or
2129 10/08/2006 2355 MM O.D. X 1954 MM I.D. X 280 MM THICK
2127 09/08/2006 insitu machining and drilling post inconel weld overlay
2127 09/08/2006 insitu machining post NQ1 weld repairs
2127 09/08/2006 M16 x 2.00 INCONEL PLUG
2123 08/08/2006 SUPPORT PLATES 1651 X 200 X 20mm THK
2123 08/08/2006 SQUARE NUT
2123 08/08/2006 SQUARE LOCKNUT
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >