Reekie Experience
8836 11/07/2018 Branch (Item 1B)
8836 11/07/2018 Pipe (Item 1A)
8836 11/07/2018 Header (Item -/1A) – Drilling & Boring 2-Holes 312 Dia
8830 09/07/2018 Heater Element Removal
8831 09/07/2018 New Bearing Housing
8832 09/07/2018 Cut Only Pup Pieces 30″NB x 19.1 Wall x 520mm Lg
8832 09/07/2018 Cut Only Pup Pieces 42″NB x 28.7 Wall x 620mm Lg
8833 09/07/2018 COST FOR PALLET AND PACKAGING FINISHED COMPONENTS TO RENFREW
8833 09/07/2018 STIRRUP CAP (Mk 3)
8833 09/07/2018 HTS STIRRUP PAD
8833 09/07/2018 MS STIRRUP
8833 09/07/2018 SWIVEL SPIDER (MK 9)
8833 09/07/2018 SWIVEL PIN FOR INTERNAL LEVER COMPLETE WITH ITEMS MK 5 & 8
8833 09/07/2018 SLEEVE
8833 09/07/2018 UPPER OUTER AIR SEAL RING
8833 09/07/2018 LOWER OUTER AIR SEAL RING ITEM 1
8827 05/07/2018 Machine the top 5292 id x 6000 od face of top flange of four in number TPs
8825 04/07/2018 14 dock RAH, rail clip parallel pin removal and rail joint slitting
8817 02/07/2018 ESV Bolt Drilling
8820 02/07/2018 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS003
8821 02/07/2018 Drilling M42x4.5 Holes
8822 02/07/2018 LR GEAR RIB BORING
Airbus A330 Gear Rib Boring and Facing Machine
8813 25/06/2018 Transportation costs associated with delivery of final goods or equipment to Customer
8813 25/06/2018 Bottom Plate
8813 25/06/2018 Top Plate
8815 25/06/2018 Feed Well
8815 25/06/2018 Return Impeller
8815 25/06/2018 Duplex Shaft
8815 25/06/2018 Feed Impeller Ring
8815 25/06/2018 Feed Impeller
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >