Reekie Experience
2031 14/06/2006 5/8″ CAP NUT
BSF thread not BSW as stated on Drg.
2031 14/06/2006 1/2″ CAP NUTS
2031 14/06/2006 CAP NUTS
2035 14/06/2006 3/4″ B.S.W. X 3.1/4″ LONG STUD FOR DOOR CLAMPS COMPLETE WITH NUTS.
2035 14/06/2006 SHOULDER BOLTS TYPE 2
2035 14/06/2006 LOCK NUTS
2035 14/06/2006 STUDS c/w HEX NUTS
2035 14/06/2006 CAP NUTS
2035 14/06/2006 CAP NUTS
2035 14/06/2006 CAP NUTS
2027 13/06/2006 ACTUATOR SUPPORT, MAIN TUBE
2025 08/06/2006 PINION SHAFT
2025 08/06/2006 FLANGE HUB
2025 08/06/2006 LANCE HUB
2025 08/06/2006 WORMSHAFT
2026 08/06/2006 BLIND FLANGE WITH WELD OVERLAY
24″ X 600#
2026 08/06/2006 BLIND FLANGE WITH RAISED FACE TO BE REMOVED – 24″ X 600#
2018 07/06/2006 SLIDING BLOCK
2020 07/06/2006 BP ETAP PLATFORM – SUPPLY OF NB4 AND OPERATOR
2021 07/06/2006 NEW ULLAGE RING MACHINING
2022 07/06/2006 R3000 machine hire charges to end July
2022 07/06/2006 MACHINE HIRE AND TRAINING TO MACHINE E.W.T FLANGES
2023 07/06/2006 Connah’s Quay, IP & HP valves, ISM or spark erode to remove two sets of twenty M24 from IP and two sets of sixteen M20 from HP studs for valve seats inside v/v
2024 07/06/2006 Daniel 24″ nb 1.1/2″ wt pipe, ISM, cut and weld prep the two cut ends
2016 06/06/2006 3/4″ BSF x 12TPi ECONOMISER PLUG
2016 06/06/2006 1.1/8″ BSF x 9TPi ECONOMISER PLUG
2009 02/06/2006 24″ 600# FLANGE X 534 MM LONG
2009 02/06/2006 16″ 600# FLANGE X 560 MM LONG
2007 01/06/2006 Supply of one reekie operator and tooling to drill thro Ø70mm, c/bore Ø110mm x 12 deep and drill/tap 2-off M8 holes at 15-off positions
2006 31/05/2006 DRILLING TEMPLATE 16″ PCD FOR 10″ 23928
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >