Reekie Experience
8815 25/06/2018 Rotor Hub
8815 25/06/2018 Rotor Bowl
8816 25/06/2018 Junction Box Housing Assembly
8809 20/06/2018 MV Burhou – Skeg
8804 19/06/2018 Butterfly Spindle Taper Pin Drilling
8805 19/06/2018 M27 Hole Repair x 3
8802 15/06/2018 AESOPS Centrifuge bed insitu machining
8798 13/06/2018 Bottom Spindle (Item 7)
8798 13/06/2018 Bottom Clapper Plate (Item 4)
8798 13/06/2018 Locknut (Item 17)
8798 13/06/2018 Bottom Clamp Plate (Item 11)
8799 13/06/2018 Hire of DR1
8796 12/06/2018 Front Tube (Item 2)
8796 12/06/2018 Rear Tube (Item 3)
8791 07/06/2018 Corry Riverside Power Station, Insitu Machining Support at June Turbine Outage
8789 06/06/2018 FRAME DOWEL
8789 06/06/2018 TRX1480JJOMCJJ55086 Dowelling
8784 04/06/2018 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS003
8785 04/06/2018 UPPERFRAME 1000 TO MACHINE TAPER THEN WELD AND REMACHINE AS PER DRAWING
8783 01/06/2018 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS003
8780 31/05/2018 Bar’er Vibration Fixture
8781 31/05/2018 15MW Drive Train Test Facility, Insitu drilling of Nacelle
8781 31/05/2018 15MW Drive train test facility, Nacelle site drilling, 54 in number M42x4.5 p x 100 deep holes (equispaced for sixty holes, ie at 6 degrees) on 1750 pcd
8782 31/05/2018 Facing and prepping the 4 Can Lower Section
8779 30/05/2018 Wing Spoiler Reaming
8774 25/05/2018 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS003
8771 23/05/2018 Drill 2-off Dowel holes
8665 21/05/2018 Stud/Tap Removal using Spark Eroder
8764 17/05/2018 Wheels
8764 17/05/2018 Wheel Retainers
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >