Reekie Experience
1552 25/08/2005 Shims for exhaust collector, shop machining to required thickness
1552 25/08/2005 EXHAUST BOOT WASHERS Ø35 OD X Ø11 ID X 4 THK
1552 25/08/2005 PLATE, CHOCK, SINGLE
1552 25/08/2005 PLATE, ADAPTER, SINGLE
1552 25/08/2005 PLATE, CHOCK, DOUBLE
1552 25/08/2005 PLATE, ADAPTER, DOUBLE
1552 25/08/2005 3/8″ UNF BOLTS TO HAVE 1-OFF WIRE LOCKING HOLE DRILLED THROUGH BOLT HEAD
1552 25/08/2005 SCREW STAINLESS PIPE END 3/4″ NPT
1552 25/08/2005 datum spigot
1552 25/08/2005 setting bar (length rod)
1552 25/08/2005 IMMOBILISER TOOL THREADED BAR
1552 25/08/2005 AFT INNER BOLTS
1552 25/08/2005 AFT PORT & STARBOARD BOLTS
1552 25/08/2005 FORWARD MID BLOTS
1552 25/08/2005 ALTERNATOR ALIGMENT TOOLING
1552 25/08/2005 AFT, CORNER BOLT DIAMETER MACHINING
1552 25/08/2005 mounting bracket cable tray
1552 25/08/2005 ISOLATOR LATERAL RESTRAINT
1552 25/08/2005 ISOLATOR LATERAL RESTRAINT
1552 25/08/2005 AFT, CENTRE BOLT DIAMETER MACHINING
1552 25/08/2005 7203 BELLMOUTH SHIM
1552 25/08/2005 7203 BELLMOUTH SHIM
1552 25/08/2005 LINER, TRUNION PIN, BOTTOM (RAB)
1552 25/08/2005 ALTERNATOR EDGE SHIM
1552 25/08/2005 LINER, ALTERNATOR (SHIM)
1552 25/08/2005 LINER, ALTERNATOR (SHIM)
1552 25/08/2005 LINER, FORWARD ENGINE MOUNT (SHIM)
1552 25/08/2005 LINER, AFT ENGINE MOUNT DIAGONAL SUPPORT (SHIM)
1552 25/08/2005 LINER, AFT COLLECTOR MOUNT SUPPORT (SHIM)
1552 25/08/2005 LINER, AFT COLLECTOR MOUNT SUPPORT (SHIM)
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >