Reekie Experience
1385 24/05/2005 Northern Producer, one Reekie operator to operate Mach-ten or others NB4, NB8 HT50, to cold cut n wp 3 x 4″ sch 40, 1 x 8″ sch 80, cold tap 2 x 140 dia n 1 x 65 dia
1387 24/05/2005 UDW-15 CONNECTOR
1381 23/05/2005 HIRE OF NB6 AND OPERATOR FOR TARTAN PLATFORM
1382 23/05/2005 KOREAN SHIP LIFT HINGE BORING AND FACING
1380 20/05/2005 ROLLED RING 73.1/4″ X 5/8″ THICK X 48″ LONG
MAT SPEC BSEN10025S275
1380 20/05/2005 72″ NB SLIP ON FLANGE NOT DRILLED (SPECIAL)
1380 20/05/2005 72″ NB SLIP ON FLANGE BST (D)
1376 19/05/2005 INDICATOR BOX
1377 19/05/2005 HIRE OF NB16 & OPERATOR
1372 17/05/2005 1000 AUTOMAX MEDIUM COARSE
1372 17/05/2005 1000 ONE PIECE UPPER FRAME MEDIUM COARSE TO ROUGH 1459.75 DIA FINSH : TURN 1182 MM DIA : CHECK TAPER AND WELD IF CUSTOMER REQUIRES
1373 17/05/2005 KOREAN SHIP LIFT
1369 13/05/2005 INSPECTION FIXTURE ITEM No 4
1369 13/05/2005 INSPECTION FIXTURE ITEM No 3
1369 13/05/2005 INSPECTION FIXTURE ITEM No 2
1369 13/05/2005 INSPECTION FIXTURE ITEM No 1
1370 13/05/2005 DRILL OUT SEIZED ORIFICE PLUG FROM PRESSURE REDUCING VESSEL
1370 13/05/2005 drill one 31 diameter hole through 43mm thick wall of each of two 14″ od pressure reducing vessels for main boiler feed pump
1363 12/05/2005 Seaway Falcon, survey crane seat for flatness
1358 10/05/2005 UNIT 4, HEATER 7B, ELLIPTICAL(OVAL) INTERNAL MANWAY DOOR REFACING
1359 10/05/2005 ACME NUT REFURBISHMENT
1359 10/05/2005 TSG work coupling bolt holes
1353 09/05/2005 drill/bor to remove seized key, 6.1/4″ dia x 6″ long, working uphand in not a lot of space, bottom dead centre of HP steam turbine casing
1353 09/05/2005 Longannet Unit 3 turbine stud drilling
1354 09/05/2005 1 off NB 4 Clamshell machine
1354 09/05/2005 PREPARE USED 2-AXIS SLIDEWAY FOR SALE, INC TOOLING r2.5/r3.0 AND PACK ALONG WITH NB4
1352 06/05/2005 CAT 988 LOADER FRAME BORES 2X4-OFF
1345 03/05/2005 Longannet Unit 4. No 2 LH TV, drill out seized studs and maybe more
1346 03/05/2005 boiler feed pump v/v’s, pressure seal area
1347 03/05/2005 HP main steam chest throttle valve, shop machine to remove seized bush
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >