Reekie Experience
1270 17/03/2005 ADJUSTING SCREW (REF 8)
1270 17/03/2005 BALANCE WEIGHT (REF 6)
1270 17/03/2005 BEARING SPINDLE (REF 7)
1270 17/03/2005 BEARING BUSH (REF 2)
1270 17/03/2005 BALANCE WEIGHT (REF 15)
1270 17/03/2005 RELIEF GATE
1270 17/03/2005 RELIEF GATE HOUSING
1270 17/03/2005 TAPER PIN
1270 17/03/2005 TAPER PIN
1266 16/03/2005 C.S. BRUSH PLOUGHS c/w FLATS and SCREWS
1268 16/03/2005 RFA Sir Tristram, A brackets and stern tubes, bore out insitu
1263 15/03/2005 Oldbury LP1 and LP2 rotors, disc 5’s, rotabroach three holes in each of a total of 3 discs, 30mm maximum dia (29mm ord’d) thro 10.75″, core drill 30 dia, flexhone deburr far end of hole, to obtain 20mm minimum diameter samples for metalurgical testing
1263 15/03/2005 Oldbury LP1 and LP2 rotors, disc 5’s, rotabroach three holes in each of a total of 3 discs, 30mm maximum dia (29mm ord’d) thro 10.75″, core drill 30 dia, flexhone deburr far end of hole, to obtain 20mm minimum diameter samples for metalurgical testing
1263 15/03/2005 preparing mock up, testing rotabore cutters, testing spark eroding equipment
1263 15/03/2005 through spindle coolant arbor for MH32/Rotabore cutters
1265 15/03/2005 HANDWHEEL CASTINGS
1265 15/03/2005 INSPECTION NIPPLES
1265 15/03/2005 LOCKING BRIDGES
1265 15/03/2005 MOUNTING PINS
1265 15/03/2005 MOUNTING PINS
1265 15/03/2005 SPINDLES
1259 14/03/2005 INNER FRAME LINER
1259 14/03/2005 INNER FRAME
1259 14/03/2005 OUTER FRAME
1254 09/03/2005 VIKING MULL – RUDDER HOUSING PACKING GLAND
1252 08/03/2005 Cat 988 loader, bucket arms hinge pin bores
1253 08/03/2005 KOREAN SHIP LIFT BEAM TREPANNING Ø230 DIA HOLE
1250 07/03/2005 FRONT HOUSING CAST IRON.
1251 07/03/2005 DEA SUPPLIER – AQUAMASTER WORMWHEEL SHAFT BOTTOM BEARING HOUSING
1249 04/03/2005 CAMERON PART NUMBER 2249296-01
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >