Reekie Experience
1247 03/03/2005 BRENT CHARLIE – ST/ST FLARING
1245 02/03/2005 extra work, waiting time, additional costs
1245 02/03/2005 VIEWING PORT APERTURE
1245 02/03/2005 CONNING TOWER APERTURE
1240 01/03/2005 DAMAGED REPAIRED WHEEL (OAKFIELD)
1240 01/03/2005 NEW SHAFT (OAKFIELD)
1240 01/03/2005 PLUMMER BLOCKS (OAKFIELD)
1241 01/03/2005 site visit to assist with operation of RAMH200 to machine a slew ring seating
1241 01/03/2005 repair to RAMH200 milling head
1242 01/03/2005 STIRRUP CAP (Mk 3)
1237 25/02/2005 R.O.T LANDING BASE WELDMENT & MACHINE DETAILS
1237 25/02/2005 R.O.T LANDING BASE WELDMENT & MACHINE DETAILS
1239 25/02/2005 ROLLED PLATE
1239 25/02/2005 BASE PLATE
1239 25/02/2005 SLIP ON FLANGE
1239 25/02/2005 MACHINING OF FLANGE FACE ON ASSY
1231 22/02/2005 REFURBISHED TAPERED ROLLER SUPPORTS
1231 22/02/2005 TAPERED ROLLER SUPPORTS
1231 22/02/2005 TAPERED ROLLERS
1231 22/02/2005 SPLIT BEARING BLOCKS
1231 22/02/2005 LARGE GEAR SHAFT (TO SUIT BLOCK A)
1231 22/02/2005 5″ SQUARE BLOCKS
1231 22/02/2005 3″ SQUARE BLOCKS
1231 22/02/2005 HORIZONTAL SMALL DRIVE HOLDER & SPLIT BUSH & NORTH/SOUTH SIDE SHAFT & HORIZONTAL END BUSH.
1231 22/02/2005 SMALL GEAR SHAFT (TO SUIT BLOCK B)
1232 22/02/2005 1000 AUTOSAND / EXTRA COARSE UPPER FRAME
1233 22/02/2005 13 plant, vessel 35/143, top end of agitator shaft, 8 dia spiralok pins
1229 21/02/2005 CRININ BRIDGE BUSHES
1229 21/02/2005 CRININ BRIDGE BUSHES
1229 21/02/2005 CRININ BRIDGE WHEEL AXLE
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >