Reekie Experience
1141 16/12/2004 BOSS 50 OD X 25 ID X 13 Lg
1141 16/12/2004 HARDENED BUSHES
1141 16/12/2004 WHEELS
1140 15/12/2004 BRUSH PLOUGH CARRIERS c/w MK1,2,3,12
1140 15/12/2004 WEAR PLATE BOLT c/w NUTS
1135 13/12/2004 CAP NUTS
1136 13/12/2004 DRILLING ON COOLING WATER PUMP Ø1./14″
1132 10/12/2004 MILD STEEL TUBE 5″NB SCH 40 BEND TO FORM VIRTAULIC GROOVES BOTH ENDS
1133 10/12/2004 SIDE PLATES
1133 10/12/2004 DOWELS 50 DIA X 200 LG
1133 10/12/2004 MAIN TOOL BLADE
1128 08/12/2004 UPPER SEAL RING.
1129 08/12/2004 LOCH STRIVEN FWD RAMP INNER/OUTER HINGES
1114 29/11/2004 FLAME HOLDER BARREL
1112 27/11/2004 RD130C EX-HIRE SIMILIAR TO ROTABROACH MICRO AIR DRILLING MACHINE
1110 26/11/2004 REPLACEMENT RING
1110 26/11/2004 1000 CONE UPPER FRAME WITH NEW RING INSERT
1108 25/11/2004 MS STIRRUP
1108 25/11/2004 SWIVEL SPIDER (MK 9)
1108 25/11/2004 SWIVEL PIN FOR INTERNAL LEVER COMPLETE WITH ITEMS MK 5 & 8
1103 23/11/2004 SEGEMENT MOUNTING PINS (ITEM-/1B)
1102 22/11/2004 CLACH heat exchanger end cap, division plate
1105 22/11/2004 DIAGE ISM Port Dundas Distillery, 14″ nb wnrf flanges
1100 18/11/2004 Mirabella V, stern ramp, M10 holes
1100 18/11/2004 stern ramp pivot plate bolt holes thro plate and ramp
1100 18/11/2004 stern ramp hinge plate bolt holes thro plate and ramp
1100 18/11/2004 drilling, spot facing and back spot facing bolt holes in fwd ram space
1100 18/11/2004 drilling, spot facing and back spot facing bolt holes in fwd ram space
1100 18/11/2004 Keelbox
1100 18/11/2004 VOSTH ISM Mirabella V keel
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >