Reekie Experience
1100 18/11/2004 VOSTH ISM Mirabella V keel
1099 17/11/2004 PLATE & CYLINDER ASSEMBLY
1099 17/11/2004 2″-11.1/2 NPTF ADAPTOR
1099 17/11/2004 1.1/2″-11.1/2 NPTF ADAPTOR
1099 17/11/2004 1.1/4″-11.1/2 NPTF ADAPTOR
1099 17/11/2004 1″-11.1/2″ NPTF ADAPTOR
1099 17/11/2004 3/4″- 14NPTF ADAPTOR
1099 17/11/2004 1/2″-14 NPTF ADAPTOR
1099 17/11/2004 ADAPTOR RECEIVER (4 off holes not to be drilled)
1091 08/11/2004 K1 CUTTER CREASER ENDCAP HOLE ENLARGING FROM Ø140 TO Ø160H7?
1085 04/11/2004 BRACKET FOR GENERAL USE
1085 04/11/2004 PLATE BASE CELL
1081 03/11/2004 ROTOMATS 1-6 SEALING FACE MACHINING
1084 03/11/2004 COMPENSATOR SIX CARCASSES UPPER ROLLER
1084 03/11/2004 COMPENSATOR SIX CARCASSES ROLLER
1078 02/11/2004 ACSU FRAME MODIFICATIONS ON MFR MAST
1079 02/11/2004 EUROPA IDLER FEED GEAR ASSY
1070 29/10/2004 10″ nb FLANGE FACING ON THE FEEDHEATER SYSTEM
1071 29/10/2004 PLATE BASE CELL
1060 22/10/2004 SEGEMENT MOUNTING PINS (ITEM-/1B)
1061 22/10/2004 PRIDE OF HULL SHAFT LINER REMOVAL
1057 21/10/2004 SCREWED ROD c/w FLANGE (REF 8)
1057 21/10/2004 RELIEF GATE APRON (Mk 1)
1057 21/10/2004 RELIEF GATES.
1058 21/10/2004 extra work
1058 21/10/2004 HCL HEADER TANK LOWER FLANGE STUD DRILLING
1052 20/10/2004 SEGEMENT MOUNTING PINS (ITEM-/1B)
1049 19/10/2004 1″-8 UNC X 1B GO/NO-GO SCREW GAUGE
1050 19/10/2004 Extra work
1044 18/10/2004 PUSH ROD ASSEMBLIES
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >