Reekie Experience
992 06/09/2004 ADAPTOR RECEIVER (4 off holes not to be drilled)
988 03/09/2004 NB8 HIRE
989 03/09/2004 OPERATOR FOR EAST BRAE PLATFORM FLARING
986 02/09/2004 4″NB FLANGE ON UNIT 4 HEATER DRAIN FLASH TANK
986 02/09/2004 4″NB FLANGE ON UNIT 4 HEATER DRAIN FLASH TANK
983 30/08/2004 PLATE & CYLINDER ASSEMBLY
983 30/08/2004 2″-11.1/2 NPTF ADAPTOR
983 30/08/2004 1.1/2″-11.1/2 NPTF ADAPTOR
983 30/08/2004 1.1/4″-11.1/2 NPTF ADAPTOR
983 30/08/2004 1″-11.1/2″ NPTF ADAPTOR
983 30/08/2004 3/4″- 14NPTF ADAPTOR
983 30/08/2004 1/2″-14 NPTF ADAPTOR
983 30/08/2004 ADAPTOR RECEIVER (4 off holes not to be drilled)
980 26/08/2004 AXLE BUSH
977 25/08/2004 UPPER SEAL RING.
973 24/08/2004 Ø6.0″ NOZZLE CUTTING ON 2-OFF VESSELS
974 24/08/2004 UNIT 4B AUX BOILER FEED PUMP FARO SURVEY
971 22/08/2004 SCREWED ROD 1.1/4″BSW X 20″ Lg
GRADE 8.8
971 22/08/2004 BLANK FLANGE
971 22/08/2004 REBATED FLANGE
969 20/08/2004 INNER BARREL
969 20/08/2004 INNER BARREL
970 20/08/2004 CSO Constructor CRANE BOOM PIN REMOVAL
968 19/08/2004 HIRE OF NB2 & R2.5 TOOLING
964 17/08/2004 MV AUTOPREMIER – AFT RAMP MAIN HINGE AND FINGER FLAP BORING
965 17/08/2004 PLATE BASE CELL
966 17/08/2004 Longannet Unit 2,Steam turbine bottom inlet, cold cut 14″ ? id x 17.3/4″ od chrome moly ? pipework under turbine
961 16/08/2004 LSDA-04 THRUSTER WELL MACHINING
962 16/08/2004 UNIT 1B FD FAN SHAFT
958 10/08/2004 SWIVEL FLANGE BOLT HOLE DRILLING
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >