Reekie Experience
952 09/08/2004 HIRE OF NB4 AND TOOLING
945 05/08/2004 Buzzard electric motor, insitu burnish 225 dia x 24 long areas on shaft
946 05/08/2004 coupling, drill out four 1/2″ bsf studs from set of eight on 9.25″ PCD
941 03/08/2004 EF100 BOILER FEED PUMP SEALING FACE MACHINING
943 03/08/2004 BLOW DOWN IODINE FILTER FLANGE FACING
938 02/08/2004 SURVEY BLADE CARRIER AND PRODUCE DRAWING
938 02/08/2004 PHOSPHUR BRONZE BLOCKS
939 02/08/2004 DISTANCE PIECE TUBE
939 02/08/2004 MOUNTING PLATE (REF-/1A)
934 29/07/2004 DAVIT MAST
934 29/07/2004 DAVIT CAPSTAN NUT
934 29/07/2004 DAVIT MAST
934 29/07/2004 DAVIT MAST
934 29/07/2004 DAVIT CAPSTAN NUT
929 27/07/2004 VOLPAK 1 MAINSHAFT REPAIR
930 27/07/2004 ISM Longannet PS, Unit 2 6A HP Heater, oval doorway
931 27/07/2004 Ø1.3/4 STUD DRILLING FROM 5T VALVES
931 27/07/2004 Longannet – v/v covers – m/c405 id x 770 od bolt hole face to specified dimension
922 23/07/2004 DRIVE KEY
922 23/07/2004 M100 X 6 CASTLE NUT
919 21/07/2004 LONGANNET NRV STUDS AND BONNET FACES
918 20/07/2004 STAINLESS DIAPHRAGM PLATES
909 14/07/2004 3B DISTANCE PIECE
909 14/07/2004 3B OUTER BARREL ASSY
909 14/07/2004 3B INNER BARREL ASSY
911 14/07/2004 1000 CONE UPPER FRAME WITH NEW RING INSERT
906 12/07/2004 ISM Propanol Chloride vessel manways, two, and a 12″nb nozzle flange of glass lined vessel
907 12/07/2004 ISM Propanol Chloride vessel manways, two, and a 12″nb nozzle flange of glass lined vessel
900 06/07/2004 7/8″ UNC X 2″ LG SET SCREW
900 06/07/2004 SITE VISIT TO INSPECT JOB
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >