Reekie Experience
900 06/07/2004 DRILL TO REMOVE 4-OFF SHEARED STUDS 7/8″UNC
897 05/07/2004 FLANGE MACHINING
895 02/07/2004 PLATE BASE CELL
896 02/07/2004 ISM Autoclave, machine 2240 id x 2480 flange, specifically 10.8 wide x 17.6 groove for seal, weld build up, finish machine
885 25/06/2004 COUPLING BOLT REMOVAL Ø2.1/4″ DIA X 8″ LG
886 25/06/2004 BASE PLATE (PUDDLE PIPE 529-531)
886 25/06/2004 BASE PLATE (PUDDLE PIPE 526-527)
886 25/06/2004 BASE PLATE (PUDDLE PIPE 518-520)
886 25/06/2004 BASE PLATE (PUDDLE 516-517)
887 25/06/2004 FLARING ON DUNLIN ALPHA
888 25/06/2004 MS TUBE 114.3 OD X 8.6 WALL X 10-12 MTR
MAT’L SPEC: MS GALVANISED
881 23/06/2004 MIL STEEL PLATES
881 23/06/2004 GEAR BOX & CAM ASSEMBLEY
875 22/06/2004 Phos Bronze Bush
876 22/06/2004 STEEL STRIP EN8
876 22/06/2004 DUCHALY HYDRO SCHEME DOWNSTREAM GATE
876 22/06/2004 DUCHALY HYDRO SCHEME UPSTREAM GATE
877 22/06/2004 PLATE BASE CELL
872 18/06/2004 PINION SHAFT
873 18/06/2004 13.5/8″ x25 ft long riser – bore out to 364mm
871 17/06/2004 WEAR PLATES MK’A’
868 15/06/2004 PUSH ROD ASSEMBLIES
863 14/06/2004 DIAPHRAGH PLATE
863 14/06/2004 DIAPHRAGM PLATE
863 14/06/2004 DIAPHRAGM PLATE
864 14/06/2004 WEAR PLATE CARRIERS (MK 34)
866 14/06/2004 1.1/4″ X 1/2″ STAINLESS STEEL BRACKETS
866 14/06/2004 Longannet Power Station – stud drilling
860 11/06/2004 hire of drilling and tapping equipment for 2.1/4″BSF
861 11/06/2004 BORE OUT Ø528MM ID PIPE FOR A LENGTH OF 48″
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >