Reekie Experience
840 26/05/2004 CONTROL RODS
840 26/05/2004 PULL RODS
840 26/05/2004 PULL RODS
840 26/05/2004 WHEEL PINS (ITEM-/1C)
840 26/05/2004 WHEELS (REF-/1B)
840 26/05/2004 RESTRAINT LUG (REF -/1D)
840 26/05/2004 PULL LUG (REF -/1C)
840 26/05/2004 FLAME SCANNER TUBE (REF -/1A)
840 26/05/2004 BOSS (REF -/1Q)
840 26/05/2004 HOUSING FERRULES (REF -/1P)
840 26/05/2004 FLAP SWIVEL TUBE (REF -/1N)
840 26/05/2004 OBSERVATION FLAP (REF-/1M)
840 26/05/2004 FLAP HANDLE (-/1H)
840 26/05/2004 FLAP SPINDLE (REF-/1G)
840 26/05/2004 OBSERVATION TUBE OUTER (REF -/1C)
840 26/05/2004 OBSERVATION TUBE HOUSING (REF -/1B)
834 25/05/2004 PLATE BASE CELL
835 25/05/2004 GRINDING THE INTERNAL SEAM ON A Ø528MM ID X 5000MM LG PIPE, 60 wt x 8.3m = 6.96 tonnes, off scale of 8 tonne crane weigher
829 20/05/2004 20″NB VALVE & FLANGE FACING
830 20/05/2004 CH Longannet – No1 HP throttle v/v – screw cutting
830 20/05/2004 CH Longannet – No1 HP throttle v/v – drill out eight 3.5/8″ studs,
827 18/05/2004 ICE MAKER SHAFT
822 17/05/2004 STONEY ROLLER TRAINS
823 17/05/2004 BRUSH PLOUGH CARRIERS c/w MK1,2,3,12
819 14/05/2004 NRV FACES & SAFETY VALVE MATING FLANGE ALL AROUND Ø3.0NB 10″ OD
819 14/05/2004 SKIM BONNET FACE TO REMOVE WELD REPAIR AND RE-INSTATE SURFACE FINISH Ø26.5/8″ OD
820 14/05/2004 machine a glassed agitator shaft
820 14/05/2004 Sleeve for Agitator Shaft
815 13/05/2004 STIRRUP PADS (MK3)
815 13/05/2004 STIRRUP CAPS (MK2)
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >