Reekie Experience
662 01/02/2004 OPV3 EOTS seating – ISM 388 id x 650 od
661 30/01/2004 MODEL J09 JACK BODY
657 28/01/2004 TALISMAN CLYDE PLATFORM – FLARING PIPES
656 27/01/2004 3.1/16″ 15K AX ring groove in 8.437″ od hub of a BOP on MG Hulme rig offshore Port Harcourt, Nigeria
648 26/01/2004 RFA FORT VICTORIA – DRILLING OUT M24 ENGINE STUD
653 26/01/2004 2B MARK’Y’ JET SPRAYERS
654 26/01/2004 COUNTER WEIGHT ROD c/w FLANGE ELBOW & LOCKNUTS (MK 9)
654 26/01/2004 COUNTER WEIGHT ROD c/w FLANGE ELBOW & LOCKNUTS (MK 9)
654 26/01/2004 SCREWED ROD c/w FLANGE (REF 8)
654 26/01/2004 RELIEF GATE APRON (Mk 1)
645 23/01/2004 Clair Phase 1 Development – North Platform Crane Pedestal – insitu machining of top face
646 23/01/2004 Type 45 mast leaf spring drilling
643 22/01/2004 CASING OD TURNING
644 22/01/2004 Ø90mm OD X Ø75mm ID X 45MM LG STAINLESS STEEL BUSHES
644 22/01/2004 SIZE BUSHES ON SITE
644 22/01/2004 ENCON BUSHES Ø74.3mm OD X Ø50.3mm ID X 70mm LG
644 22/01/2004 ENCON BUSHES Ø74.3mm OD X Ø50.3mm ID X 50mm LG
637 19/01/2004 24″ MANDOOR WITH 1″ DIA HOLE
637 19/01/2004 24″ MANDOORS
638 19/01/2004 MATERIAL TEST CERTIFICATES
638 19/01/2004 M36 X 2P PLUGS
MAT’L SPEC: A182-F91
638 19/01/2004 M36 X 2P PLUGS
MAT’L SPEC: A182-F22
638 19/01/2004 M36 X 2P PLUGS
MAT’L SPEC: A182-F11
638 19/01/2004 M36 X 2P PLUGS
MAT’L SPEC: BS970-070M20
635 17/01/2004 Cockenzie PS – main boiler feed pump –
631 16/01/2004 GLAND PACKING SLEEVES
631 16/01/2004 SHAFT REPAIR & KEY
632 16/01/2004 Phos Bronze Bush
633 16/01/2004 WAITING TIME
634 16/01/2004 HM Submarine …… Mast – greasing port – re-thread
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >