Reekie Experience
518 07/10/2003 3B ‘Y’ JET ATOMISER
515 06/10/2003 PLATE BASE CELL
516 06/10/2003 STIRRUP CAP (Mk 3)
516 06/10/2003 HTS STIRRUP PAD
516 06/10/2003 MS STIRRUP
516 06/10/2003 SWIVEL SPIDER (MK 9)
512 03/10/2003 MISC MAST MFR, 09 DECK & RESM DOORS
506 30/09/2003 HIRE OF R2 & TOOLING
502 25/09/2003 CRUACHAN – SERVO MOTOR DRILL AN DREAM 12-OFF HOLES Ø40.0MM
502 25/09/2003 M36 FITTED BOLT Ø42.0mm SHANK X 144mm LG
C/W NUT & 2-OFF WASHERS
503 25/09/2003 CRUACHAN – MIV CYLINDER BRACKET DOWEL HOLES 2-OFF SETS OF 4-OFF Ø50.0MM
504 25/09/2003 DOWEL PIN Ø40.04 X 60MM LG
504 25/09/2003 CRUACHAN GUIDE VANE STEADY PLATE – DRILL AND REAM 2-OFF SETS OF FOUR Ø40.0MM
500 24/09/2003 Ø580 od x Ø383 id FLANGE MACHINING
498 23/09/2003 ATOMISER TAILPIECE 2B ‘Y’ JET ATOMISER
498 23/09/2003 ATOMISER BODY
496 22/09/2003 MV HEBRIDEAN ISLES – STERN RAMP LINE BORING
497 22/09/2003 PUSH ROD ASSEMBLIES
490 19/09/2003 TAPERED SLEEVES TO SUIT BALL JOINT
491 19/09/2003 RINGS 1600 OD X 1525 ID X 7.5Thk
493 19/09/2003 MCS Lenie ( a twin screw tug) port & stb ships’ rudder tubes
489 18/09/2003 umbilical bending stiffener moulding
488 17/09/2003 SHOP Ø2,086MM ID FLANGE MACHINING
484 15/09/2003 MEDIUM TOP BOLLARD
484 15/09/2003 MEDIUM BOTTOM BOLLARD
481 12/09/2003 ASSEMBLY OF RELEIF GATE
482 12/09/2003 LEAF SPRING BORING / GRINDING ON MAST CAPS AT WOOLSTON
483 12/09/2003 SPARK ERODING ECONOMISER PENETRATION PLUG
479 11/09/2003 BP FORTIES ALPHA – 4″ PIPE GROOVING 2-OFF USING T115
478 10/09/2003 SEGEMENTAL CUTTING OF THROAT PLATE
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >