Reekie Experience
8615 26/02/2018 Flat Bar 133 x 68 x 1420 machined from 155 Dia round Bar x 1425mm Lg
Tolerances : +/-0.15mm on widths, +/-0.5mm on length
8616 26/02/2018 GENERAL PICKUP AND DELIVERY OF GOODS
8616 26/02/2018 ChaseThread Mill Eight existing 4.1/4″ 4 UN Holes to suit new Cap Screw
8609 23/02/2018 SPARE AIR MOTOR PACK
8606 22/02/2018 SRV STATIC TARGET CORRECTION
8606 22/02/2018 INDIA TARGET TEST RING CORRECTION
8606 22/02/2018 SRV ANGLED TARGET CORRECTION
8607 22/02/2018 Hire of Drilling Machine for M30 holes
8608 22/02/2018 Guidance Access Door Dowels
8605 21/02/2018 END CLOSURE PLATE SUPPORT
8605 21/02/2018 POWER CABLE GUIDE
8605 21/02/2018 CABLE CLAMP MK ‘B’
8605 21/02/2018 CABLE CLAMP MK ‘A’
8605 21/02/2018 CABLE SUPPORT ‘X’ = 50 MM
8605 21/02/2018 CABLE SUPPORT ‘X’ = 25 MM
8605 21/02/2018 MOTOR SHAFT KEY
8601 19/02/2018 2″ N.B. SCH 40 STEEL BENDS TO WELD PREP BOTH ENDS
8601 19/02/2018 1/2″ N.B. SCH 40 45° AND 90° STAINLESS STEEL BENDS TO WELD PREP BOTH ENDS
8601 19/02/2018 10″NB SCH 40 MILD 45° AND 90° STEEL BENDS TO WELD PREP BOTH ENDS
8592 14/02/2018 Rear Section (Item A)
8592 14/02/2018 Tip Section (Item D)
8592 14/02/2018 Front Section (Item C)
8592 14/02/2018 Centre Section (Item B)
8592 14/02/2018 Rear Section (Item A)
8592 14/02/2018 Front Section (Item D)
8592 14/02/2018 Front Mid Section (Item C)
8592 14/02/2018 Rear Section (Item A)
8593 14/02/2018 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS003
8594 14/02/2018 VISUAL INSPECTION & FUNCTIONAL TEST
RB40MCAIRBUS001
8589 12/02/2018 REAR FRAME SLEEVE FOR A WA-470
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >