Reekie Experience
393 22/07/2003 SPOT FACING ON SITE
393 22/07/2003 PLATEN BUSH – MATERIAL SPEC 4130 MIL-S-6758 CONDITION ‘D’
393 22/07/2003 PACKING WASHERS TO SUIT UNDERCARRIAGE LOWER REAR ATTACHMENT
393 22/07/2003 High Duty Alloy spacer washers
394 22/07/2003 PLATE BASE CELL
390 21/07/2003 Longannet Unit 4 stud removal
388 18/07/2003 TAPERED KEYS 1.1/4″ WIDE X 12″ LONG
388 18/07/2003 SLOTTING OF SLEEVE
388 18/07/2003 KEYWAY CUTTING
385 17/07/2003 4″ DIA WHEELS
385 17/07/2003 PALLET TRUCK REFURBISHMENT
386 17/07/2003 UCTP LID MACHINING
382 16/07/2003 Logannet – Unit 3 H mill – bed plate – OSM
380 14/07/2003 Shin HEPS Alternator shaft, 19″ diameter and 2″ radius
374 10/07/2003 drill out 1″ UNC studs
372 09/07/2003 MEDIUM TOP BOLLARD
372 09/07/2003 MEDIUM BOTTOM BOLLARD
360 04/07/2003 Combined hull v/v – back up v/v seat
361 04/07/2003 SPLIT FEMALE SLIP TIES (LH & RH)
361 04/07/2003 SPLIT FEMALE SLIP TIES (LH & RH)
363 04/07/2003 PHOS. BRONZE BUSH REPAIR
364 04/07/2003 COUPLING YOKE HANDLE
364 04/07/2003 LOCKING RINGS
364 04/07/2003 BACK WASHER (MK36)
364 04/07/2003 ASSEMBLY OF 3B Y-JET ATOMISERS
364 04/07/2003 HINGE PIN 3/8″ X 1.1/8″LG
364 04/07/2003 ATOMISER TAILPIECES
364 04/07/2003 ATOMISER BODIES 3B MARK ‘Y’ JET
364 04/07/2003 3B CAP NUT
364 04/07/2003 TORQUE RING
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >