Reekie Experience
333 11/06/2003 Port Talbot-blast furnace trunnions
334 11/06/2003 MACHINE CHAMFER TO ALLOW EASY LIP SEAL FITMENT
332 10/06/2003 SS57 STUD DRILLING
332 10/06/2003 1.1/2″ BSP TAPPING
332 10/06/2003 G7 DIVERTER GAS PLANT
332 10/06/2003 MAIN TURBINE STEAM CHEST BORING AND SCREWING
332 10/06/2003 LP VENT VALVE BORING – SS57
332 10/06/2003 Economiser Penetrations – holes in tube sheet
331 09/06/2003 HIGH LIFT DAVIT MAST
331 09/06/2003 DAVIT MAST
331 09/06/2003 DAVIT CAPSTAN NUT
323 06/06/2003 IGNITER CARRIER TUBE EXTENSION
323 06/06/2003 DISTANCE PIECE
323 06/06/2003 OUTER BARREL ASSEMBLY
323 06/06/2003 INNER BARREL
324 06/06/2003 Libya – Dolphin- BX154
326 06/06/2003 WYLFA STANDPIPE MACHINING
327 06/06/2003 WHEEL PRESS – BORING OUT FOR 66 CLASS SHAFTS
328 06/06/2003 WHEEL PRESS – BORING OUT FOR 66 CLASS SHAFTS
320 05/06/2003 HIRE OF NB12 AND OPERATOR
321 05/06/2003 HIRE OF R3 FOR ABERDEEN
322 05/06/2003 Grudie Bridge HEP Unit2 – Insitu machining of bottom cheek plate
322 05/06/2003 Grudie Bridge HEP – Insitu machining of bottom cheek plate
315 03/06/2003 LONGANNET POWER STATION – UNIT 2B AIR HEATER SHAFT DRILLING
314 02/06/2003 MACHINE 2-OFF FLANGES Ø1600MM DIA
311 30/05/2003 Cruachan bottom cover – bolt holes – scallop 8 of 96 holes
312 30/05/2003 DRILL & TAP
312 30/05/2003 1″ BSP EXTRA LONG PLUG
301 26/05/2003 PLATE & CYLINDER ASSEMBLY
301 26/05/2003 2″-11.1/2 NPTF ADAPTOR
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >