Reekie Experience
301 26/05/2003 1.1/2″-11.1/2 NPTF ADAPTOR
301 26/05/2003 1.1/4″-11.1/2 NPTF ADAPTOR
301 26/05/2003 1″-11.1/2″ NPTF ADAPTOR
301 26/05/2003 3/4″- 14NPTF ADAPTOR
301 26/05/2003 1/2″-14 NPTF ADAPTOR
301 26/05/2003 ADAPTOR RECEIVER (4 off holes not to be drilled)
302 26/05/2003 CRANE JIB BORING
297 22/05/2003 Phos Bronze Bush
295 20/05/2003 LIFEBOAT KEEL MACHINING
291 17/05/2003 PLATE BASE CELL
292 17/05/2003 ADJ. ROD CLEVIS
292 17/05/2003 FLAP OPERATING HANDLE.
292 17/05/2003 OBS. DOOR BOLT
292 17/05/2003 ADJ. ROD FERRULE
292 17/05/2003 DOOR PIN
292 17/05/2003 PINS
292 17/05/2003 RETAINING RINGS
292 17/05/2003 ADJ. ROD FERRULE GLAND NUT
292 17/05/2003 RETAINING RINGS
292 17/05/2003 DAMPER WHEEL
292 17/05/2003 25.4 MM (1″) DIA WHEEL
292 17/05/2003 AXLE PIN
292 17/05/2003 PINS
292 17/05/2003 OBSERVATION DOOR
292 17/05/2003 OBS. DOOR MOUNTING TUBE
292 17/05/2003 FERRULE (ITEM 16)
292 17/05/2003 DAMPER PULL ROD
292 17/05/2003 SWIRLER PULL ROD
292 17/05/2003 CENTRALISING PIN
289 15/05/2003 PACKAGING AND TRANSPORTATION TO ABERDEEN
Case Studies
View All >
Tartan Platform – Releasing Caisson from Dead Weight Support
The customer required a robust solution to release one of their caissons from a unique dead weight support structure. The caisson had a cone feature that nested into a mating cone in the platform support.
Find Out More >
Machining of Hang off Module (HOM) Rails on Deep Blue Vessel
The rails that the HOC runs on had become extremely worn and were affecting operations. The pair of rails, 11,080 mm long x 230mm wide, needed to be machined flat and to a common plane within 0.25mm.
Find Out More >